Proxima ASA 9260/9240 manual Troubleshooting, Cleaning the Lens

Page 51

APPENDIX

CLEANING THE LENS

Follow these steps to clean the projection lens:

1.Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner.

Abrasive cleaners, solvents or other harsh chemicals might scratch the lens.

2.Lightly wipe the cleaning cloth over the lens.

3.When you are not using the projector, replace the lens cover.

TROUBLESHOOTING

Before calling your dealer or service station for assistance, check the items below once again.

1. Make sure you have connected the projector to your equipment as described in section "CONNECTING THE USA PROJECTOR" on pages 11 ~ 18.

2.Check cable connections. Verify that all computer, video and power cords are properly connected.

3.Verify that power is switched on.

4.If the projector still does not display an image, re-start the computer.

5.If the image still does not display, unplug the projector from the computer and check the computer monitor's display. The problem may be with your graphics controller rather than with the projector. (When you reconnect the projector, remember to turn the computer and monitor off before you power up the projector. Power the equipment back up in order of: Projector and computer)

6.If the problem still exists, check the following chart.

Problem:

Try these Solutions:

 

 

No power.

● Plug the projector into an AC outlet.

 

● Turn the MAIN ON/OFF switch to ON.

 

● Press the POWER ON/OFF switch to ON.

 

● Be sure the READY INDICATOR light is ON.

 

● Wait approximate 2 minutes after the projector is turned OFF before turning the

 

projector back on.

 

NOTE: After pressing the POWER ON/OFF button to OFF. The projector functions

 

as indicated.

 

1. The LAMP POWER indicator will light and the READY indicator will turn off.

 

2. After approximate 2 minutes, the READY indicator will light green again and the

 

projector may be turned on by pressing the POWER ON/OFF button.

 

● Check temperature warning indicator. If the indicator flashes red, the projector

 

cannot be turned on.

 

(See "BASIC OPERATION" section on page 27).

 

● Check the projection lamp.

 

● Replace the lamp cover. (Check the interlock switch inside of the lamp cover.)

 

 

Image is out of focus.

● Adjust the focus.

 

● Make sure the projection screen is at least 4.6' (1.4 m) from the projector.

 

● Check the projection lens to see if it needs cleaning.

 

NOTE: Moving the projector from a cool temperature location to a warm

 

temperature location may result in moisture condensation on the lens. In

 

such an event, leave the projector OFF and wait until condensation

 

disappears.

 

 

51

Page 50 Page 52
Image 51
Page 50 Page 52
Contents Desktop Projector To the Owner Important Safety Instructions Table of Contents Features and Design Rear of the Projector InstallationName of Each Part of the Projector Front of the ProjectorVentilation SETTING-UP the ProjectorPositioning Room LightMoving the Projector Adjustable FeetPower Requirements Terminal of the Projector Connecting the ProjectorConnecting to the Monitor Output Terminal Connecting the ComputerConnecting AN IBM-COMPATIBLE Desktop Computer Connecting AN IBM-COMPATIBLE Laptop Computer Connecting a Macintosh Desktop Computer Connecting a Macintosh Powerbook Computer Connecting to the Component Video Input Jacks Connecting the Video EquipmentConnecting to the Video Input Jack Connecting S-VHS Video Input JackVideo Equipment Connecting the Video EquipmentConnecting to the EXT. SP. Jack 3.5 mm mini stereo type TOP Controls Controls and IndicatorsFront Indicators Before OperationLamp Replacement Indicator Laser Pointer button Operation of the Remote ControlSound Mute Button Remote Control Battery Installation Direct Operation Control the ProjectorCOMPUTER/VIDEO Mode Video ModeMenu Operation Computer Mode Basic Operation Turning ON/OFF the ProjectorDirect Operation Sound Mute Function Sound Volume AdjustmentZoom Adjustment Focus AdjustmentNormal Picture Function No Show FunctionFreeze Picture Function Auto Image FunctionButton Point Left Select Point Down Menu OperationLanguage Adjustment Sound AdjustmentColor System Select Video ModeComponent Video System Select Video Source SelectPicture Image Adjustment Select Button Picture Screen AdjustmentComputer Mode PC AdjustmentComputer System Select Compatible Computer Specifications Main Menu Display Auto Image Setting Fine Sync Picture Position Adjustment PC Adjustment OK ? Clamp Mode Free Digital zoom Blue Back On or Off Other Function SettingMode Lamp AGE Appendix MaintenanceTemperature Warning Indicator AIR Filter Care and CleaningOrder Replacement Lamp Lamp ReplacementCleaning the Lens TroubleshootingWhere to Get Help Remote Control Transmitters Technical SpecificationsWarranty 2000 610 282 2038 1AA6P1P2055-- MF6F

9260/9240 specifications

Proxima ASA 9260/9240 is a groundbreaking solution in the realm of advanced automation systems and precision engineering. Designed with the latest technological advancements, this model stands out for its robust features that cater to both industrial and research needs.

One of the key features of the Proxima ASA 9260/9240 is its high performance and reliability. It incorporates cutting-edge sensors and measurement technologies that enable it to achieve unparalleled accuracy in data collection and processing. The integration of advanced algorithms ensures that the system can maintain stability and precision even under varying operational conditions.

The ASA 9260 model is particularly noted for its enhanced automation capabilities. Equipped with smart control systems, it allows for real-time monitoring and adjustments, ensuring optimal performance across various tasks. The predictive maintenance features also enable operators to anticipate potential issues before they escalate, minimizing downtime and enhancing productivity.

Meanwhile, the ASA 9240 model focuses on versatility and adaptability. It supports a wide range of applications, making it an ideal choice for organizations looking to implement sophisticated systems across different sectors. With customizable interfaces and modular designs, users can tailor the configurations to meet specific operational requirements.

In terms of connectivity, both models are equipped with advanced communication protocols such as IoT integration, enabling seamless data sharing and system interoperability. This connectivity fosters a more collaborative work environment, as teams can access real-time data and insights from various locations.

Energy efficiency is another critical aspect of the Proxima ASA 9260/9240. The systems are designed to optimize energy consumption, contributing to lower operational costs and a reduced carbon footprint. This focus on sustainability aligns with the growing demand for eco-friendly solutions in industrial applications.

Additionally, user-friendly interfaces make it easy for operators to interact with the system, reducing the learning curve and enhancing overall usability. Comprehensive support and training resources further ensure that users can maximize the potential of the ASA 9260/9240 models.

In summary, the Proxima ASA 9260/9240 is a highly advanced automation solution characterized by its precision, versatility, and innovative features. Its robust performance, adaptability, and commitment to sustainability make it a top choice for industries aiming to harness the power of automation while prioritizing efficiency and reliability.
Top Page Image Contents