3M X40C, S40C manual Lamp, High Voltage High Temperature High Pressure

Page 30

THE LAMP

HIGH VOLTAGE

HIGH TEMPERATURE

HIGH PRESSURE

Before replacing the lamp, check the serial number of the replacement lamp bulb (sold separately: 78-6969-9463-7 for S40 / 78-6969-9565-9 for X40), then contact your local dealer.

Before replacing the lamp, turn off the power, and unplug the power WARNING cord, then wait at least 45 minutes, in order to ensure that the lamp is

properly cooled. Removing the lamp bulb while it is still hot could cause burns, or cause the lamp bulb to burst.

The LCD projector uses a glass lamp bulb. It is a mercury lamp with high WARNING internal pressure. High-pressure mercury lamps can break with a loud

bang, or burn out, if jolted or scratched, or through wear over time. Each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, when the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the projector’s vent holes.

•Handle with care: jolting or scratching could cause the lamp bulb to burst during use.

•If the replace lamp indicator (see "Related Messages" ( 34 ) and "Regarding the indicator Lamps" ( 35 )) comes on, replace the lamp as soon as possible. Using the lamp for long periods of time, or past the replacement date, could cause it to burst. Do not use old (used) lamps; this is a cause of breakage.

•If the lamp breaks soon after the first time it is used, it is possible that there are electrical problems elsewhere besides the lamp. If this happens, contact your local dealer.

•If the lamp should break (it will make a loud bang when it does), ventilate the room well, and make sure not to breathe the gas that comes out of the projector vents, or get it in your eyes or mouth.

•If the lamp should break (it will make a loud bang when it does), unplug the power cord from the outlet, and make sure to request a replacement lamp from your local dealer. Note that shards of glass could damage the projector’s internals, or cause injury during handling, so please do not try to clean the projector or replace the lamp yourself.

•Obey local ordinances when disposing of used lamps. In most cases, it is possible to dispose of used bulbs in the same manner as used glass bottles, but in some cases, bulbs are sorted separately.

•Do not use the projector with the lamp door removed.

29

Page 29 Page 31
Image 30
Page 29 Page 31
Contents S40C/X40C Multimedia Projector Contents S40C/X40C Multimedia Projector Operators GuideProjector Features Connect your devices to the projector Part Names ProjectorTerminal Panel Setting UP the Projector Adjusting the Projectors Elevator FootAdjusting the Screen Size and Projection Distance Top view Side viewConnecting Your Devices Ports and Cables Function Projector Port Connection CablesConnecting Your Devices Connecting to a ComputerConnecting to a DVD Player Connecting to a VCRRemove the battery cover Using the Remote ControlPutting batteries into the remote control unit Close the battery coverOperating the remote control Make sure that the power cord is firmly Turning on the PowerPrecautions Turn on the projectors powerScreen size Selecting an Input SignalUse the zoom ring to adjust Use the focus ring to focus the picturePress the STANDBY/ON button of remote Turning OFF the PowerAgainremote control or control panel Controrol or the on/off button of control panelPress Buttons to adjust Volume Adjusting the VolumePress the Volume button Temporarily Muting the SoundAdjusting the Position Use Buttons to adjust PositionPress the Position button Automatic Adjustment for Video Input Using the Automatic Adjustment FeatureAutomatic Adjustment for RGB Input Press the Auto buttonUse the , buttons to correct Correcting Keystone DistortionsPress the Keystone button DistortionUsing the Magnify Feature Freezing the ScreenSignal Searching Selecting the Aspect RatioTemporarily Blanking the Screen Select an item using Buttons, then press Or Enter button Using the Menu FunctionsSelect a menu using Buttons Then press Or Enter button Press Buttons to adjust the levelMultifunctional Settings Main MenuMain Menu PICTURE-1 Menu PICTURE-1 MenuPICTURE-2 Menu PICTURE-2 MenuAuto Input MenuInput Menu VideoBlank Screen MenuScreen Menu Start UPAuto OFF Option MenuOption Menu WhisperHigh Voltage High Temperature High Pressure LampReplacing the lamp AIR Filter Caring for the air filterAir Filter Replacing the air filter Caring for the inside of the projector Caring for the cabinet and remote control transmitterOther Care Caring for the lensRelated Messages Regarding the Indicator Lamps Power Lamp Temp DescriptionPhenomena That May Easily Be Mistaken for Machine Defects PhenomenonItems to be confirmed Specifications Dimension DiagramSpecification Not Included with Basic Packet How to OrderPart Number AcccessoriesDN00571 QR58621OGENG

X40C, S40C specifications

3M S40C and X40C are two highly advanced adhesive products that have transformed the way industries approach bonding and sealing applications. Both are part of 3M’s extensive portfolio, known for their cutting-edge technologies and unparalleled performance.

The 3M S40C is particularly noted for its exceptional strength and versatility. This adhesive is designed for a variety of substrates, including metals, plastics, and composites. Its primary feature is its high shear strength, which allows it to withstand significant load and stress, making it ideal for demanding applications in automotive, aerospace, and construction sectors. The S40C formulation includes advanced polymer technology that enhances adhesion while providing resistance to environmental factors such as moisture, temperature fluctuations, and chemical exposure.

In terms of application, the S40C offers excellent workability. Its user-friendly nature allows for easy dispensing and spreading, reducing application time and increasing efficiency. The curing process is also an important aspect; the adhesive typically cures at room temperature, but can be accelerated with heat, allowing for faster project turnaround times. Additionally, the S40C is known for its rapid bonding capabilities, which can significantly improve production flow in industrial settings.

On the other hand, the 3M X40C brings a unique combination of performance and flexibility. This adhesive is specifically engineered for applications requiring a balance between flexibility and strength. It is especially suitable for bonding materials that may experience expansion and contraction, such as rubber and certain plastics. The X40C features a different polymer matrix designed to absorb shock and vibration, which is crucial for applications in industries like electronics and transportation.

One of the standout characteristics of the X40C is its resistance to harsh environmental conditions. Whether exposed to UV rays, extreme temperatures, or chemicals, the X40C maintains its adhesion properties, ensuring long-lasting performance even in challenging environments. It also offers excellent clarity, making it a popular choice for applications where aesthetics are a consideration.

Both the S40C and X40C exemplify 3M’s commitment to innovation and quality. They are manufactured with stringent quality control measures in place, ensuring consistent performance and reliability. As industries continue to evolve, these adhesives represent the forefront of bonding technology, providing solutions that are not only effective but also efficient and sustainable. Whether through unparalleled strength or remarkable flexibility, 3M S40C and X40C are set to lead the way in adhesive applications across multiple sectors.
Top Page Image Contents