Remote Control Transmitter Identification, Stick Switch

2.4 Remote Control Transmitter Identification

STANDBY / ON button

Power ON/OFF button.

OFF sets the unit in standby mode.

ZOOM button

Adjusts picture size.

TIMER ON / OFF button

Displays or removes TIMER.

When the blank screen is displayed,

TIMER can not be displayed.

BLANK ON / OFF button

Blanks the screen. Pull down or left on stick switch to reveal screen.

POSITION button

Hold this button and move stick switch to adjust vertical and horizontal image position.

INPUT SELECT buttons

Selects the input source.

If Menu is on screen, stick switch controls movement within menu.

If Menu is not displayed, stick switch is used for mouse emulation, i.e. left mouse button and cursor movement.

If Menu is on screen, button resets menu to factory default settings.

If Menu is not displayed, button is used for mouse emulation, i.e. right mouse button.

MENU ON / OFF button

Displays or removes the on-screen menus.

FOCUS button

Adjusts focus.

VOLUME button

Adjusts volume.

MUTE button

Disables sound.

How to insert batteries:

1.Remove the battery compartment cover.

Slide the battery compartment cover in the direction of the arrow while pressing slightly down on it.

Insert the provided batteries (AA or R6P) into the remote control transmitter.

2. Insert the batteries as illustrated inside the battery compartment.

3. Replace the cover.

3M™ Multimedia Projector MP8630