3M MP7760 manual Advanced Set-Up, Description / Action Default Setting Sub-Menu Items

Section 4: Operating Instructions

4-5. Menu Adjustments/Settings, continued

In active PC/RGB mode

Advanced Set-Up
(PC/RGB)	Description / Action		Default Setting
Sub-Menu Items
Projection	Select projection orientation
	(Standard / Rear / Rear/Top Down /		Standard
(drop-down window)
	Top/Down)
Remote Control	Remote control receiver		-on
	-on /	-off
RC Address	Select remote control address		1
	(1 / 2 / 3 / 4)
	Select Sync Mode for PC/RGB
Sync Mode	(separate TTL / composite TTL /		separate TTL
(drop-down window)	separate ana. / composite ana. /
	sync on green)
SOG Level	Adjust level for sync on green
	synchronization
Reset Data Modes	Set all data modes to factory
	default settings
Reset Lamp Display	Resets the lamp hours displayed in
	the Info window
Test	Display test sub-menu
In active Video mode
Advanced Set-Up
(Video)	Description / Action		Default Setting
Sub-Menu Items
Projection	Select projection orientation
	(Standard / Rear / Rear/Top Down /		Standard
(drop-down window)
	Top/Down)
Remote Control	Remote control receiver		-on
	-on /	-off
RC Address	Select remote control address		1
	(1 / 2 / 3 / 4)
	Select Video Standard
Video Standard	(PAL B, G, H, I / NTSC M / SECAM		Automatic
(drop-down window)	/ NTSC 44 / PAL M / PAL N / PAL
	60 / NTSC COMB / Automatic)
Reset Lamp Display	Resets the lamp hours displayed in
	the Info window
Test	Display test sub-menu

© 3M IPC 2000 3M™ Multimedia Projector MP7760 17