LG Electronics LP-XG2 owner manual Basic Operation of the Projector

Page 15

ENGLISH

Basic Operation of the Projector

1. Place the projector on a sturdy and horizontal surface with the PC or AV source.

2. Place the projector in the correct distance from the screen. The distance between the projector and the screen determines the actual size of the image.

	Screen size	Horizontal distance from
	Screen size	projector to screen
		projector to screen
	610x460cm(300inch)	12.55m~16.35m
	410x300cm(200inch)	8.35m~10.87m
	200x150cm(100inch)	4.16m~5.42m
	160x120cm(70inch)	2.90m~3.78m
	120x90cm(50inch)	2.06m~2.69m
	81x61cm(40inch)	1.64m~2.15m

3. Turn the projector so that the lens can be at a right angle to the screen. If the projector is not at a right angle, the screen image will be crooked. At this time perform keystone function. (Refer to page 35.)

4. Connect the cables of the projector to a wall power socket and other connected sources.

14

Image 15

Contents LP-XG2 LCD Projector Contents Safety Instructions English Never touch the power plug with wet hand Don’t cover the project when in useOnly use the projector on a level and sta- ble surface It may cause electric shock or a fire Rear Connecting Part Names of partsMain Body Control Panel Arrow direction Remote ControlSlide the battery cover Inserting the batteriesRefer to page 39~40 Functions on the Remote ControlDownsizes the screen on the zoom function Enlarges the screen size on zoom functionInstallation and Connection AccessoriesMouse Connecting Cables Using Kensington Security System Projector Status Indicators Basic Operation of the Projector How to connect Connecting to a Desktop PCConnecting to a Notebook PC Connecting to a Macintosh Desktop PC Adjusting letter Adjusting number How to use How to use the Macintosh desktop adaptorConnecting to a Macintosh PC Connecting to a Macintosh PowerBook Connecting to a Video Source Remove the lens cover of the projector Press the main power button on the back panelAdjust volume level Turning on the ProjectorFocusing and Positioning the Screen Image Operating the ProjectorZoom ring Focus ring Horizontal leveler Function checking Press the Menu buttonPress the button you can see menus as below Selecting source mode Press the Still button Using Still functionAs below Selecting languageUsing Flip Horizontal / Vertical function Flip Horizontal FunctionPress the Enter button to see reversed image Flip Vertical Function Using Blank function Press the Blank buttonTo exit the blank status, press the Blank button again Selecting Blank Image color Checking lamp time Selecting PC screen size input signal Adjusting screen display To adjust the screen condition as you wantPositioning Press the Zoom button again to finish the zoom function You can use this function by using the Menu buttonZoom Function Left,right,up, or downYou can also use this function by using the Menu button Using Resize functionAdjusting Video Press the Enter buttonVideo item as you want Using Tracking function Auto Tracking FunctionPress the Auto Tracking button Condition Clock / Phase FunctionPhase item MenuSources Format Supported Monitor DisplayCleaning the lens MaintenanceBelow Reset Lamp TimeProjection Lamp Lamp model Operating Condition TemperaturePower consumption Humidity