LG Electronics 47WV30BS, 47WV30MS, 47WV30-BAAL, 47WV30BR setup guide Dpm

MULTIVISION CONFIGURATION 25

Signage Mode	Decide to work all functions of
Operation	'Signage Mode Operation' or not.
15Min Force	Turns off the monitor if there is no
Off	input for more than 15 minutes.
	"No" is the recommended default
	value setting.
4 hours off	Turns off the monitor if there is no
	input on the remote control for more
	than four hours.
	"No" is the recommended default
	value setting.
Wake On LAN	Turns on the monitor remotely using
	LAN.
Total Set ID	Sets the maximum value for picture
	IDs.
DPM	Enters energy saving mode if there is
	no input signal.
Software	Sets whether to use NSU (Network
Update	Software Update).
Power On	Decide to select working status
Status	of Monitor Set when turn on main
	power.
Input Source	Decide to change input source or not
Change	by setting 'Input Source Change' as
	Yes(Change possible) or No(Change
	impossible).
Menu Display	MENU key does not work if 'Menu
	Display' is set to No.
OSD Display	Decide to display OSD or not by
	setting 'OSD Display' as Yes(Mark)
	or No(No Mark).
Min Volume	Decide 'Min Volume' between
	changing range 0 to 100.
Max Volume	Decide 'Max Volume' between
	changing range 0 to 100.
Power On	With the power turned on, you can
Default	set the 'Input Source' and 'Volume'
	options.
Input Source	Set whether it is turned on by the
	set input source or by the last stored
	input source.
Volume	This sets whether to apply the
	Volume Level or not when the power
	is turned on.

Aspect Ratio	With the power turned on, you can
	set the 'Aspect Ratio' option with the
	pre-defined value.
Intelligent Auto	If the setting is Yes, Display is
	automatically arranged through
	resolution size when you change the
	resolution at the first.
Factory Reset	If it is set to No, 'Factory Reset' under
	OPTION is disabled.

ENGLISH