Setting up
The speakers are detached from the speaker stands.
Assembling to the Speakers
1 Fix the post to the base by rotating the post. And Draw the speaker cord through the hole on the base.
2 Draw the speaker cord through the hole on the speaker.
3 Fix the speaker to the stand by rotating the speaker. Connect the speaker cord to the appropriate terminals on the speaker.
Attaching the speakers to the DVD receiver
aYou will have received 4 speaker cables.
Each one is
bConnect the wires to the DVD receiver.
Match each wire’s colored band to the same colored connection terminal on the rear of the DVD receiver. To connect the cable to the DVD receiv- er, press each plastic finger pad to open the connection terminal. Insert the wire and release the finger pad.
Connect the red end of each wire to the terminals marked +(plus) and the black end to the terminals marked - (minus).
cConnect the wires to the speakers.
Connect the other end of each wire to the correct speaker according to the color coding:
COLOR | SPEAKER | POSITION | |
Green | Center | Above screen, directly in front of you. | |
|
|
| |
Orange | Sub Woofer |
| |
|
|
| |
Red | Front | In front of you, to the right of the | |
screen. | |||
|
| ||
White | Front | In front of you, to the left of the | |
|
| screen. |
To connect the cable to the speakers, press each plastic finger pad to open the connection terminals on the base of each speaker. Insert the wire and release the finger pad.
5