Installing the Tilt/Swivel Base
Turn off the equipment and all attached options.
Carefully set the monitor
Installation
1.Align the hooks on the tilt/swivel stand with the matching slot on the base (underside of the monitor). The open hooks of the stand should face the front of the monitor. The matching slots are on the first row of slots showing 2 pairs of slots.
2.Insert the hooks into the front and rear slots. The stand should now fit flush with the bottom of the monitor.
3.Slide the stand toward the front of the monitor, until the latch clicks into the locked position. Now only the bottom of the stand should be movable.
4.Carefully upright the monitor, taking care to place the monitor down flatly on an even surface.
NOTE: To remove the stand, gently push in the latch on the bottom of the monitor and then slide the stand toward the back of the monitor. After sliding the stand back, lift off the stand from the monitor.
A5