LG Electronics E1950T, E2050T, E2350T manual Auto Button, Input Button, Exit Button, Power Indicator

Control Panel Functions

AUTO Button	AUTO IMAGE ADJUSTMENT
	When adjusting your display settings, always press
	the AUTO button before entering the On Screen
	Display(OSD). (Only Analog Mode)
	This will automatically adjust your display image to
	the ideal settings for the current screen resolution
	size (display mode).
	The best display mode is
	E1950T : 1360 x 768
	E2050T : 1600 x 900
	E2250T : 1920 x 1080
	E2350T : 1920 x 1080
INPUT Button	Use this button to select source from input.
(SOURCE Hot key)
	When two input signals are connected, you can select the
	input signal (D-SUB/DVI) you want. When only one signal
	is connected, it is automatically detected. The default
	setting is D-Sub.
EXIT Button	Exit the OSD(On Screen Display).

Power Button & Use this button to turn the display on or off.

Power Indicator

From front view,the power indicator stays purple if the display is running properly (On Mode). If the display is in Sleep Mode (Energy Saving), the power indicator is blinking purple.

Light Sensor	This is lens for light sensor detect outside luminance,
	when setting AUTO BRIGHT ON.

12