LG Electronics 84WS70MS owner manual Network Status, Tips for Network setting

Page 21

ENTERTAINMENT 21

NOTE

yyIf you want to access the Internet directly on your display, the internet connection should always be on.

yyIf you cannot access the Internet, check the network conditions from a PC on your network.

yyWhen you use Network Setting, check the LAN cable or check if DHCP in the router is turned on.

yyIf you do not complete the network settings, the network may not work properly.

Tips for Network setting

yyUse a standard LAN cable with this display. Cat5 or better with a RJ45 connector.

yyMany network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the display to the home network, quickly power off and/or discon- nect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.

yyDepending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP.

yyLG is not responsible for any malfunction of the display and/or the internet connection feature due to communication errors/malfunctions as- sociated with your internet connection, or other connected equipment.

yyLG is not responsible for problems within your internet connection.

yyYou may experience undesired results if the network connection speed does not meet the requirements of the content being accessed.

yySome internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your Internet connection.

yyAny fees charged by an ISP including, without limitation, connection charges are your respon- sibility.

yyA 10 Base-T or 100 Base-TX LAN port is

required when using a wired connection to this display. If your internet service does not allow for such a connection, you will not be able to con- nect the display.

yyA DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this display or you may be limited to the number of devices you can connect at the same time. (If your ISP limits sub-scription to one device, this display may not be allowed to connect when a PC is already connected.)

yyThe use of a “Router” may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly.

Network Status

1Press MENU to access the main menus.

2Press the Navigation buttons to scroll to NET- WORK and press OK.

3Press the Navigation buttons to select Net- work Status.

4Press OK to check the network status.

5When you are finished, press EXIT.

ENGLISH

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Monitor Signage Contents Licenses Assembling and Preparing AccessoriesMedia Player Screw Optional AccessoriesOptional Box ScrewParts and buttons Menu Screen Marks DescriptionPortrait Layout Using the Mounting Cable TieConnecting the Eye-Bolt Bracket Connecting the Media PlayerScrews Attach the box using the two provided screws Connecting an Optional BoxMounting on a wall Volume Up / Down Remote ControlA Button Toggles between numerical and alphabetical Number and Alphabet buttonsUSB Menu control buttons Navigation buttons Scrolls through menus orChange Device Name SimpLink Setting You can select any option for Input Label except USBYyInput labels available Blu-ray, DVD, VCR Connecting to a PC Using the MonitorMacintosh Adapter not included RGB connection DVI-D connection Display Port connection Hdmi connectionPress Input to access the Input List Using the Input ListInput source Description Display PortSelect Set Expert Select Manual Mode or Auto Input Connecting to a wired networkEntertainment InternetNetwork Status Tips for Network settingTips for using USB storage devices Connecting USB storage de- vicesThrough a USB hub, the device is not recog- nizable Ported or operate smoothlyEnglish Using My Media Supported File FormatsSupporting file Type Supporting file Video MusicPhoto Playing video Selects the desired point and playsPlays Sets options Stops playback Returns to List Subtitles YyOnly 10,000 of sync blocks are supportedCorrectly, the video and subtitle files must Only, Motion Jpeg 10 MbpsViewing photos Plays Selects the desired point Sets options Returns to List Listening to musicCustomizing Settings Picture settingsAvailable Picture settings are described in the following Disabled Advanced image options Picture Mode optionsDegree of darkness black level of the screen Picture OptionOff Turns off LED Local Dimming User De-Judder / De-Blur can be set manuallyUsing the additional options Adjusting aspect ratio169 Just Scan Original Zoom Cinema Zoom Original Just ScanSound settings YyThe remote control does not have hotkey to Sound ModeAvailable Sound options are described in the following Time settings Available Option settings are described in the following Option settingsInitial Setting Setting Description DivXR VODSimpLink Set IDSupport settings Network settingsAvailable Network settings are described in the following Available Support settings are described in the followingHD Receiver Making ConnectionsSpeaker Camcorder/Camera Gaming deviceHdmi connection Avcvbs connection Connecting to the LAN Connecting to a USBUsing a routerSwitch Using the InternetMode Daisy Chain MonitorsNo image is displayed TroubleshootingKey Yy Turn both devices off and then back onAfter-image appears on the product Key Lock On message appearsAudio function does not work Applicable only for models that support the speakers SpecificationsHDMI/Display Port PC supported mode RGB PC supported modeDVI-D PC supported mode Resolution Horizontal Vertical FrequencykHz FrequencyHzMode Product DTV ModeDimensions Code Hexa Function IR CodesRS-232C Configurations Connecting the cableControlling the Multiple Product Communication ParameterCommand Data Command reference listVersion Command2 Set ID NGDatax If there is error, it returns NG Error AcknowledgementTransmission/ Receiving protocol TransmissionReal data mapping ContrastCommand k, g TintCommand k, j BrightnessCommand k, h SharpnessCommand k, kColorCommand k Remote Lock /Key LockCommand k, m BalanceCommand k, tAbnormal stateCommand k, z Energy SavingCommand j, q ISM MethodCommand j, p Remote KeyCommand m, cAuto Config.Command j, u MediumPC Power ControlCommand d, t PC PowerCommand d, sPicture ModeCommand d, x To adjust the picture mode Data Hex ModeDataHex Mode Sound ModeCommand d, y SpeakerCommand dElapsed time returnCommand d, l To read the elapsed time Sleep TimerCommand f, f Set Sleep TimerPower On DelayCommand f, h ResetCommand f, k LanguageCommand fDPM SelectCommand f, j 42. S/W VersionCommand f, z Check the software version Serial no.CheckCommand f, y Check the Serial noOff Time ScheduleCommand f, c On Time scheduleCommand f, bOff TimerRepeat mode/TimeCommand f, e On TimerRepeat mode/TimeCommand f, d SizeCommand f, s On Timer InputCommand f, u PositionCommand f, rInput SelectCommand x, b PositionCommand f, qEnglish Model
Top Page Image Contents