SETUP
SETUP
LANGUAGE To choose the language in which the control
| names are displayed. |
OSD | To adjust position of the OSD window on the |
POSITION | screen. |
WHITE | If the output of the video card is different the |
BALANCE | required specifications, the color level may |
| deteriorate due to video signal distortion. Using |
| this function, the signal level is adjusted to fit into |
| the standard output level of the video card in |
| order to provide the optimal image. |
| Activate this function when white and black colors |
| are present in the screen. (Only for |
OVERSCAN It is the function to filter out the noise which may
| be generated around the edge of the image when |
| connecting the HDMI and the external device. |
| When it is set to ON, the original image is |
| enlarged with no noise. |
| When it is set to OFF, the original size is displayed |
| as it is regardless the noise. (Only for HDMI input) |
RTC | If you set ON, you enable the Response Time |
| Control function and reduce the afterimage of the |
| screen. |
| If you set OFF, you disenable the Response |
| Time Control function and operate at panel |
| response time. (Only W2286L) |
• MENU : Exit
• • : Adjust
•• • Adjust
•SET • Select another
POWER INDICATOR
Use this function to set the power indicator on the front side of the monitor to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power indicator will automatically be turned on.
FACTORY Restore all factory default settings except
RESET "LANGUAGE."
Press the A, • buttons to reset immediately.