Adjusting the Screen
TIME ID to adjust the time function
Time
Clock |
| |
Off time |
|
|
On time |
|
|
Auto sleep |
|
|
|
|
|
OK | MENU | |
Clock
Off/On time
Auto sleep
This function is used to set up of current time.
You must set the time correctly before using On/Off time function.
1)Press the MENU button and then use 
button to select the TIME menu.
2)Press the 
button and then use 
button to select the Clock menu.
3)Press 
button and then use 
button to set the hour(00~23).
4)Press 
button and then use 
button to set the minutes(00~59). The default value is
5)Press the OK/MENU button to save.
The Off time automatically switches the set to off mode at the
1)Press the MENU button and then use 
button to select the TIME menu.
2)Press the 
button and then use 
button to select Off time or On time.
3)Press the 
button and then use 
button to set the hour(00~23).
4)Press the 
button and then use 
button to set the minutes(00~59).
5)Press the 
button and then use 
button to select On or Off.
6)Only On time function; Press the 
button and then 
button to adjust volume level and programme number.
7)Press the OK/MENU button to save.
If Auto sleep is active and there is no input signal, the set switches to off mode automatically after 10 minutes. ( It is not working in PC)
1)Press the MENU button and then use 
button to select the Auto sleep menu.
2)Press the 
button and then use 
button to select On or Off.
3)Press the OK/MENU button to save .
Note
•In the event of power interruption (disconnection or power failure), the Clock must be reset.
•Two hours after the set is switched on by the On time function it will automatically switch back to off mode unless a button has been pressed.
•Once the On or Off time is set, these functions operate daily at the preset time.
•Off time function overrides On time function if they are set to the same time.
•The set must be in off mode for the On time to work.
•On time will move on to auto off if no activity is received in 2hours after setting the On time.
37