SpecificationsL1942P/L1942PQ

Display		19 inches (48.2 cm) Flat Panel Active matrix-TFT LCD
		Anti-Glare coating
		Visible diagonal size: 48.2 cm
		0.294 mm pixel pitch
Sync Input		Horizontal Freq.		Analog : 30 - 83 kHz (Automatic)
				Digital : 30 - 71 kHz (Automatic)
		Vertical Freq.		56 - 75 Hz (Automatic)
		Input Form		Separate TTL, Positive/Negative
				SOG (Sync On Green)
				Digital
Video Input		Signal Input		15 pin D-Sub Connector
				DVI - D connector (Digital)
		Input Form		RGB Analog (0.7 Vp-p/ 75 ohm), Digital

Resolution		Max		Analog : VESA 1280 x 1024 @75 Hz
				Digital : VESA 1280 x 1024 @60 Hz
		Recommend		VESA 1280 x 1024 @60 Hz
Plug&Play		DDC 2B (Digital), DDC 2AB (Analog)
Power		On Mode		:	34 W(Typ.)
Consumption		Sleep Mode		≤	1 W
		Off Mode		≤	1 W
Dimensions			With Stand			Without Stand
	&Weight	Width	40.63 cm / 16.00 inches			40.63 cm / 16.00 inches
		Height	42.27 cm / 16.64 inches			34.45 cm / 13.56 inches
			53.27 cm / 20.97 inches
		Depth	24.16 cm / 9.51 inches			5.84 cm / 2.30 inches
		Net		4.23 kg (9.40 lbs)
Tilt Range		Tilt		-6˚~17˚
Power Input		AC 100-240V~ 50/60Hz 0.8A
Environmental		Operating Conditions
Conditions		Temperature		10˚C to 35 ˚C
		Humidity		10 % to 80 % non-Condensing
		Storage Conditions
		Temperature		-20˚C to 60 ˚C
		Humidity		5 % to 90 % non-Condensing

	Stand Base	Attached( ), Detached ( O )

Signal cable		Attached( ), Detached ( O )
Power cord		Wall-outlet type or PC-outlet type

NOTE

Information in this document is subject to change without notice.

A21