On Screen Display(OSD) Selection and Adjustment
Main menu | Sub menu | Description |
LANGUAGE
SETUP
OSD
POSITION
S E T U P
To choose the language in which the control names are displayed.
To adjust position of the OSD window on the screen.
S E T U P
MENU : Exit
+ : Adjust
SET : Select another
WHITE | If the output of the video card is different |
BALANCE | from the required specifications, the color |
| level may deteriorate due to video signal |
| distortion. Using this function, the signal |
| level is adjusted to fit into the standard |
| output level of the video card in order to |
| provide the optimal image. |
| Activate this function when white and |
| black colors are present in the screen. |
POWER | Use this function to set the power |
INDICATOR indicator on the front side of the monitor to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power indicator will automatically be turned on.
4:3 IN WIDE To select the image size of the screen.
WIDE4:3
*4:3 : Depending on the input video signal ratio,
it is automatically changed to an optimized screen ratio. (The 1280X1024 input signal is changed
to 5:4 ratio and 1024X768 to 4:3.)
Resolution | Screen ratio |
|
|
1280x1024 | 5 : 4 |
1152x864 | 4 : 3 |
1024x768 | 4 : 3 |
800x600 | 4 : 3 |
640x480 | 4 : 3 |
720x480 | 3 : 2 |
|
|
❈The input signal which the 4:3 IN WIDE does not support the '4:3' is the following.
-The 22 inch monitor is 720x400,1280x768,1360x768,1680x1050
FACTORY Restore all factory default settings except
RESET "LANGUAGE."
Press the - button to reset immediately.
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled only when the input signal is an analog signal.
A14