Troubleshooting
Check the following before calling for service.
No image appears
Is the power cord of the display connected?
Is the power indicator light on?
When the power is on with the power indicator lighting blue, does the screen appear dark?
(Display:blue, Media station:blue)
Is the power indicator amber? (Display:amber, Media station:blue)
Do you see an "OUT OF RANGE" message on the screen?
Does the “OUT OF RANGE” message appear when you have set the main source as HDTV?
Do you see a "CHECK
SIGNAL CABLE " message on the screen?
Check and see if the power cord is connected properly to the power outlet.
Press the Power button.
Adjust the brightness and the contrast.
If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen.
This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again.
*Max Resolution 1280 x 1024 @60Hz
Check if the HDTV resolution of your set top box is set at 480i/576i. If so, reconfigure it to 576p/720p/1080i
This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again.
Press the SOURCE button on the remote control and select and input signal connected.
A35