Signal Cable

Connecting the Display

20.1 inch monitor

Analog signal Digital signal

D-sub DVI

Varies according to model.

NOTE

This is a simplified representation
of the rear view.
This rear view represents a	1
general model; your display may	1

differ from the view as shown.

PowerCord

Wall-outlet type

PC-outlet type

DVI-D(This feature is not available in all countries.)

MAC

Mac adapter

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector.

4. Press button on the front switch panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically.

(Only Analog Mode)

NOTE

‘Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push the ‘AUTO/SET’ button on the front panel of the monitor. Otherwise, you may execute the ‘ Factory reset’ option on the OSD adjustment menu. However, be aware that this option initializes all the menu items except ‘Language’.