LG Electronics L1719SP, L1919SP manual To remove the Stand Base Type. B

Page 7

Connecting the Display

To remove the Stand Base:

Type. B

1. Ensure there are two latches at the 2.Hold the body of the Stand as it follows. bottom of the Stand Base.

3. Press the two latches individually toward each end as shown

4. Pull up the body of the Stand while holding the Stand Base with the other hand.

5. The body of the Stand and the Stand Base are successfully separated.

A6

Image 7

Contents L1719S/L1719SP L1919S/L1919SP On Safety Important PrecautionsOn Disposal On InstallationOn Cleaning On RepackingConnecting the stand Connecting the DisplayTo remove the Stand Type. a To remove the Stand Base Type. B Ergonomic Positioning your displayPower Cord Signal Cable Using the ComputerOSD LOCKED/UNLOCKED Control Panel FunctionsFront Panel Controls Control FunctionControlFunction Auto Image AdjustmentPower Button Power IndicatorScreen Adjustment On Screen Display OSD Control AdjustmentMain menu Sub menu Reference On Screen DisplayOSD Selection and AdjustmentSub-menus Blue Contrast GammaRED GreenOSD Position White Balance PhasePower Indicator Factory ResetUser Flatron F-ENGINEOSD Unlocked will appear TroubleshootingIs the power cord of the display connected? Do you see OSD Locked when you push Menu button?Screen color is mono or abnormal Screen blinksHave you installed the display driver? Weight ResolutionPower DimensionsA21 Preset Modes Resolution SpecificationsIndicator Installing the Wall mount plate Kensington Security Slot Wall mount plateSeparate purchaseDigitally yours