LG Electronics IPS236V, IPS226V Auto Button, Input Button, Exit Button, Power Indicator

Control Panel Functions

AUTO Button	AUTO IMAGE ADJUSTMENT
	When adjusting your display settings, always press
	the AUTO button before entering the On Screen
	Display(OSD). (Only Analog Mode)
	This will automatically adjust your display image to
	the ideal settings for the current screen resolution
	size (display mode).
	The best display mode is
	IPS226V/IPS236V : 1920 x 1080
INPUT Button	Use this button to select source from input.
(SOURCE Hot key)
	When two input signals at least are connected, you can
	select the input signal (D-SUB/DVI/HDMI) you want. When
	only one signal is connected, it is automatically detected.
	The default setting is D-Sub.
EXIT Button	Exit the OSD(On Screen Display).

Power Button & Use this button to turn the display on or off.

Power Indicator

The power indicator stays blue if the display is running properly (On Mode). If the display is in Sleep Mode (Energy Saving), the power indicator is blinking blue.

10