Connecting the Display
Connecting with the PC
1. | Before setting up the monitor, ensure that the power to the monitor, the computer |
2. | system, and other attached devices is turned off. |
Connect signal input cable 1 and power cord 2 in order, then tighten the screw |
of the signal cable.
AConnect
BConnect
CConnect HDMI Cable
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
AV equipment | Varies according to model. |
(Set-Top Box, DVD,
Video,
Video Game Console)
* HDMI is optimized on the AV equipment. * Not supported PC
Connect the signal input cable and tighten it up by turning in the direction of the arrow as shown in the figure.
Headphone/Earphone Input
When using a
Mac adapter : For Apple Macintosh use,
aseparate plug adapter is needed to change the 15 pin high density (3 row) D- sub VGA connector on the supplied cable to a 15 pin 2 row connector.
6