LG Electronics W1952TE, W2252TE manual Connecting the Display, Connecting the stand

Page 4

Connecting the Display

Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off.

Connecting the stand

1. Place the monitor with its front facing downward on a soft cloth.

2. Assemble the Stand Body into the product in the correct direction as shown in the picture.

Stand Body

 

Hinge Body

 

 

 

3. Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction.

Stand Base

 

Stand Body

 

 

 

4. Insert the Cable Deco Cover in the Stand Body in the correct direction.

Stand Base

Cable Deco Cover

Cable Deco Cover

Stand Body

 

 

 

 

 

5. Once assembled take the monitor up carefully and face the front side

Important

This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture.

Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot.

A3

Image 4
Contents W1952TE W2252TE Important Precautions On SafetyOn Installation On CleaningOn Repacking On DisposalConnecting the Display Connecting the standDisassembling the stand Positioning your display Tilt Range -5˚~20˚ ErgonomicUsing the Computer Wall-outlet type PC-outlet typeFront Panel Controls Control Panel FunctionsOSD LOCKED/UNLOCKED Auto Image Adjustment Button For more information, refer to page A17On Screen Display OSD Control Adjustment Screen AdjustmentOn Screen DisplayOSD Selection and Adjustment Tracking ClockIcons Preset Brightness Contrast GammaRED GreenClock Phase TrackingPower Indicator Reset LanguageOSD PositionEZ Zooming WidePhoto Effect SoundMovie User UserTroubleshooting No image appearsDisplay image is incorrect Have you installed the display driver? Specifications W1952TE DisplaySpecifications W2252TE Specifications Preset Modes ResolutionDigitally yours