LG Electronics 27MB85RB Customizing Settings, Activating the Main Menu, Monitor buttons

Page 23

CUSTOMIZING SETTINGS 23

CUSTOMIZING SETTINGS

Activating the Main Menu

1Press the Menu ( ) button.

2Use the <, > button to adjust the options.

To return to the upper menu or set other menu items, use the Menu ( ) button.

3Press and hold the Menu ( ) button to exit the OSD menu.

Monitor buttons

Button

Description

Menu (

)

If the menu is inactive

Activates the main menu.

If the menu is active

Returns to the previous menu.

If the menu is inactive

Activates/deactivates a picture mode.

If the menu is active

Left directional key

If the menu is inactive

Activates/deactivates the Super Energy Saving (SES) mode.

If the menu is active

Right directional key

OK

If the menu is inactive

Confirms the selection.

If the menu is active

Pressing OK shows the resolution of the current signal (only when there is

input signal).

(Power

Powers on or off.

Button)

Power Indicator

When the monitor is in operating mode, the power indicator will turn red (on

mode).

When the monitor is in power-saving mode, the power indicator will blink

red.

NOTE

yy All of the buttons are touch sensitive and can be operated by simply touching them on the bottom front of the monitor with your finger.

ENGLISH

Image 23

Contents IPS LED Monitor LED Monitor Contents License Calibrator ACB8300 Depending On Country Power Cord Cable Holder DVI-D Dual Cable Guide book / CardAssembling and Preparing Product CompositionTouch buttons Input ConnectorComponent and Button Description Scratched or damaged and to ensure safe trans When moving or lifting the monitor, follow theseMoving and Lifting the Monitor Instructions to prevent the monitor from beingStand Body and push it all the way up.Turn Installing the MonitorAssembling the Stand Base Align the hole on the Stand Base withBody Installing on to a TableDetaching the Stand Base Place the screen face down130.0 mm HeadLocking pin Gather and bind the cables with the supplied cable Holder Adjusting the Stand Height Tidying CablesRear Side Front Side Head Stand Pivot FeatureDetaching the stand body Using the Kensington LockWall mount plate Adjusting the AngleInstalling on the Wall Required Screws Wall Mount Plate ModelVesa a x B Stand ScrewHdmi Connection Connecting to a PCDisplayPort Connection DVI ConnectionThunderbolt Connection Connecting AV DevicesHDMI/DP DisplayPort Connection Connecting PeripheralsUSB Cable Connection PC USB port on the product functions as a USB hubAngle Type Straight Type Headphone Port ConnectionInstalling LG Monitor Software System LG Monitor Software installation starts as Shown belowEnglish Monitor buttons Customizing SettingsActivating the Main Menu Contrast Volume Input Ratio Customizing SettingsMenu Settings Wide Original Back Exit Each option is described below Ratio SettingsPress OK to select Ratio Menu Description Super Energy Saving SES SettingsOff Disables the Super Energy Saving SES function Off Back Exit Each option is described belowEach option is described below Mode SettingsPress or to go to Mode PIP settings English Back Exit PicturePress or to go to Picture Press OK to select Picture Gamma Red Green Blue Six Color Reset Back ExitColor Press or to go to Color Press OK to select ColorBack Exit Sound Each option is described below SettingsPress or to go to Settings Press OK to select Settings Language Main Audio Button Power LEDYy Check that the connected input is enabled Menu Input TroubleshootingYy Check the power indicator Display color is abnormal Panel Display Settings Color QualityOr reinsert the PCs video card 27MB85Z Specifications27MB85R Hdmi Timing Video Factory Support Mode Preset Mode PCPower Indicator SUB/DVI DTV modes interlace mode are not supportedProper Posture Page Model Serial No