ENGLISH
20CUSTOMIZING SETTINGS
FUNC. Setting
SUPER ENERGY SAVING
1Press FUNC. button on the bottom of the Monitor set to
display the FUNC. OSD.
2 Enter to SUPER ENERGY SAVING by pressing the ▼ button.
3 Set the options by pressing the ◄ or ► or ▼buttons.
4Select EXIT to leave the OSD menu.To return to the
upper menu or set other menu items, use the up arrow (
) button.
Each option is explained below.
SUPER ENERGY SAVING | Description |
High | Enables SUPER ENERGY SAVING you can save energy with this energy- high efficient function. |
Low | Enables SUPER ENERGY SAVING you can save energy with this energy- low efficient function. |
Off | Disables SUPER ENERGY SAVING. |
NOTE
yyTOTAL POWER REDUCTION: How much power is saved while using the monitor.
yyTOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2. yySAVING DATA(W/h)
| 546 mm | 584 mm | 604 mm | 685 mm |
| (21.5 inch) | (23 inch) | (23.8 inch) | (27 inch) |
|
|
|
|
|
SUPER SAVING(High) | 4 W/h | 4 W/h | 4 W/h | 6 W/h |
|
|
|
|
|
SUPER SAVING(Low) | 2 W/h | 2 W/h | 2 W/h | 3 W/h |
|
|
|
|
|
yySaving Data depends on the Panel. So,those values should be different from each panel and panel vendor.If option of Super Energy Saving is High or Low, monitor luminance become higher or lower depend on source.
yyLG calculated these values by using “broadcast video signal” (including broadcast video: IEC 62087)
yySUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING function.
yyIf option of Super Energy Saving is High or Low, Picture Mode will automatically be Custom and Reader Mode will automatically be Reader Off.