| Controlling Multiple Set | |
|
|
|
Transmission / Receiving Protocol
38.Scheduling Input select (Command: f u) (Main Picture Input) ► To select input source for monitor depending on day.
Transmission
[f][u][][Set ID][][Data1][][Data2][Cr]
[Data 1]
1.f1h to f4h(write/read one index) f1: read 1st index of On Time Input
f2: read 2nd index of On Time Input
f3: read 3rd index of On Time Input
f4: read 4th index of On Time Input
[Data 2] Input
Data(Hex) | INPUT | |
02 | AV |
|
04 | Component | |
07 | RGB - PC |
|
08 | HDMI/DVI - |
|
09 | HDMI/DVI - PC |
|
*When you read/delete the current On Time Input, [Data2] needs to be FFH. (ex1: fu 01 f1 ff - when you read 1st index of On Time Input
ex2: fu 01 f3 02 - when you write one On Time Input Data in to 3rd index, "AV")
Acknowledgement
[u][][Set ID][][OK][Data1][Data2][x]