LG Electronics W2486L, W2286L Osd, Position, White, Balance, Overscan, Indicator, Factory Reset

On Screen Display(OSD) Selection and Adjustment

Main menu Sub menu Description

SETUP

D-SUB input

LANGUAGE To choose the language in which the control names are displayed.

OSD	To adjust position of the OSD window on the
POSITION	screen.
WHITE	If the output of the video card is different the
BALANCE	required specifications, the color level may
	deteriorate due to video signal distortion. Using
	this function, the signal level is adjusted to fit into
	the standard output level of the video card in
	order to provide the optimal image.
	Activate this function when white and black colors
	are present in the screen. (Only for D-SUB input)

OVERSCAN

HDMI input

R T C

POWER

MENU : Exit	INDICATOR
: Adjust
: Adjust
SET : Select another
sub-menu

FACTORY

RESET

It is the function to filter out the noise which may be generated around the edge of the image when connecting the HDMI and the external device. When it is set to ON, the original image is enlarged with no noise.

When it is set to OFF, the original size is displayed as it is regardless the noise. (Only for HDMI input)

If you set ON, you enable the Response Time Control function and reduce the afterimage of the screen.

If you set OFF, you disenable the Response Time Control function and operate at panel response time. (Only W2286L)

Use this function to set the power indicator on the front side of the monitor to ON or OFF.

If you set OFF, it will go off.

If you set ON at any time, the power indicator will automatically be turned on.

Restore all factory default settings except

"LANGUAGE."

Press the , buttons to reset immediately.

NOTE

If this does not improve the screen image, restore the factory default settings. If necessary, execute the white balance function again. This function will be enabled only when the input is a D-SUB input.

24