Connecting the Display
Connecting the stand
1. Place the monitor with its front facing downward on a soft cloth.
2. Assemble the stand base into stand body in the correct direction as shown in the picture, then tighten the screw which is attached to the stand base.
|
|
| Stand Base | |||||
|
| Stand Body |
|
|
|
|
| Screw |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3. Once assembled take the monitor up carefully and face the front side.
Disassembling the stand
1.
2.
Place the monitor face down on the cushion or soft cloth.
Loosen the screw which is attached to the stand base, then take off the stand base
from stand body. | Stand Body | Stand Base | Screw |
|
Important
This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture.
Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot.
A4