_,Thescreencoloris monoorabnormal.
•Check if the signal cable is properly connected and use a screwdriver to fasten if necessary.
•Make sure the video card is properly inserted in the slot.
•Set the color setting higher than 24 bits (true color) at Control Panel
_,Thescreenblinks.
_, Have you installed the display driver?
_, Do you see an "Unrecognized monitor, Plug&Play (VESADDC) monitor found" message?
•Check if the screen is set to interlace mode and if yes,change it to the recommend resolution.
•Be sure to install the display driver from the display
driver CD (or diskette)that comes with your display.Or,you can also download the driver from our web site:http://www.lge.com.
•Makesureto check ifthe videocard supports Plug&Playfunction.