LG Electronics W2261V manual Have you installed the display driver?

Page 22

Troubleshooting

Display image is incorrect

●The screen color is mono or abnormal.

●The screen blinks.

•Check if the signal cable is properly connected and use a screwdriver to fasten if necessary.

•Make sure the video card is properly inserted in the slot.

•Set the color setting higher than 24 bits (true color) at Control Panel - Settings.

•Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.

Have you installed the display driver?

●Have you installed the display driver?

●Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?

•Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lge.com.

•Make sure to check if the video card supports Plug&Play function.

A21

Page 21 Page 23
Image 22
Page 21 Page 23
Contents W2261V Important Precautions On SafetyOn Repacking On InstallationOn Cleaning On DisposalConnecting the stand Disassembling the standPositioning your display Tilt Range -5˚~17˚ ErgonomicUsing the Computer Wall-outlet type AV equipmentPower button Front Panel Controls OSD LOCKED/UNLOCKEDAuto Image Adjustment Button For more information, refer to page A17~A18Screen Adjustment On Screen DisplayOSD Selection and Adjustment Button Tip Menu Name Icons Sub-menus RED PresetBrightness Contrast Gamma GreenClock Phase TrackingOSD IndicatorReset Language PositionEZ Zooming WideGaussian Blur VolumeNormal SepiaA17 A18 Troubleshooting Display image is incorrect Have you installed the display driver? Specifications Preset Modes Resolution IndicatorDigitally yours
Top Page Image Contents