Onkyo Essential Guide to Optimizing Your SKW 204 Speaker

Page 7

SKW204_En Page 7 Monday, March 20, 2006 9:22 AM

Adjustments

Crossover frequency and output level

Adjust the SKW-204 output level and crossover fre- quency to suit your listening room and connected speakers.

Be aware that you might set the subwoofer to a high output level because superbass-range sound is less audible than other sound ranges. To obtain well-bal- anced frequency characteristics, set the output level to a slightly lower level than seems optimal. (This will also prevent the input of signals that are too strong.)

Note:

Be careful not to allow the input of excessive power. Input levels that greatly exceed normal situations can damage the SKW-204. Also note that switching opera- tions at the amplifier may generate excessive noise that may result in damage. When using switches at the amplifier, first lower the volume to prevent accidental damage.

Placement

The placement of the SKW-204 can greatly affect the sound that is produced. In general, a good bass sound can be obtained by installing the subwoofer in a front corner, or at one-third the width of the wall, as shown.

Corner

1/3 room

length

Troubleshooting

The unit does not turn on

The power plug is not fully inserted.

Insert the power plug fully into the power outlet.

No sound is output

The OUTPUT LEVEL knob is set to the MIN level.

Set the OUTPUT LEVEL knob properly.

Pin connector cable is not properly connected to the LINE INPUT jack.

The speaker setting at the amplifier (or receiver) is incorrect.

Check the settings at the amplifier (or receiver).

The input signal is so small that the unit entered Standby mode.

Slightly increase the output level at the amplifier (or receiver).

Low sound output

The sound source might not include a superbass range.

Play a sound source that includes a superbass range.

Hum noise

Pin connector plug is not inserted completely.

Fully insert the pin connector plug.

External leakage flux (induction noise by TV, etc.) occurs.

Relocate the SKW-204 away from the noise source and re-connect.

7

Image 7
Contents SKW-204 Avis Important Safety InstructionsPower PrecautionsPrecautions Supplied AccessoriesPin connector cable 10 ft m Power-plug adapter North American Model ControlsOther Models Subwoofer effects ConnectionsPlacement AdjustmentsTroubleshooting Onkyo U.S.A. Corporation Specifications

SKW-204 specifications

The Onkyo SKW-204 is a powerful subwoofer designed to enhance your home audio experience, delivering deep, resonant bass that brings movies, music, and gaming to life. This model is part of Onkyo's commitment to providing high-performance audio equipment for both casual listeners and serious audiophiles.

One of the main features of the SKW-204 is its 10-inch driver, which is tailored to produce a rich low-frequency response. This driver is housed in a sturdy enclosure that helps minimize distortion, ensuring that you experience clean and powerful bass. The subwoofer’s frequency response ranges from 32 Hz to 150 Hz, making it capable of reproducing the profound sounds of explosions in action films or the nuanced depths of orchestral music.

The SKW-204 utilizes a built-in high-efficiency amplifier that delivers 100 watts of power, providing headroom for dynamic audio playback. This amplification ensures that the subwoofer can keep up with the demands of powerful audio tracks without sacrificing quality or clarity. The amplifier is also designed with advanced circuitry to optimize performance and reduce unnecessary power consumption.

Another key characteristic of this subwoofer is its phase control feature, which allows users to match the subwoofer’s output with other speakers in their home audio setup. This ensures a seamless integration of sound, resulting in a balanced and immersive surround sound experience. The SKW-204 also includes adjustable crossover settings, granting users the flexibility to tailor the bass output to their specific audio preferences or room acoustics.

The design of the Onkyo SKW-204 is both functional and aesthetically pleasing. With a sleek black wood veneer finish, it can complement any home décor while also being robust enough to withstand everyday use. The inclusion of both line and speaker level inputs enhances its versatility, enabling it to be easily connected to various audio systems, whether they are stereo or home theater configurations.

In summary, the Onkyo SKW-204 is an impressive subwoofer that stands out for its power and versatility. With its high-efficiency amplifier, adjustable phase control, and thoughtful design, it is an excellent choice for anyone looking to elevate their audio experience at home. Whether you’re watching a thrilling blockbuster, blasting your favorite music, or immersing yourself in a video game, the SKW-204 promises to deliver the reliable, deep bass you crave.