Nokia WT615, WT610, LT380, LT265, LT245, LT280 manual Set Easy Connection

Page 7

3.Setting the LAN Settings for the Projector

4Set “Easy Connection”.

LT380/LT280/LT265/LT245

(1)Select the [PC Card] tab, and confirm that “Easy Connection” has been set in Profiles.

(2)Highlight [Reconnect], and press the <ENTER> button. An hourglass icon is displayed on the screen.

(3)When the hourglass icon disappears, highlight [OK] and press the <ENTER> button.

(4)Press the <EXIT> button several times to close the on-screen menu.

WT615/WT610

(1)Confirm that [Easy Connection] has been set in Profiles.

(2)Highlight [Reconnect], and press the <ENTER> button. An hourglass icon is displayed on the screen.

(3)When the hourglass icon disappears, highlight [OK] and press the <ENTER> button.

(4)Press the <EXIT> button several times to close the on-screen menu.

3

7

Image 7 Contents
Image Express Utility 2 for Mac OS User’s Guide Introduction Contents What You Can Do with Image Express Utility Supported Projector Operating EnvironmentOperating Environment Easy Connection is Setting the LAN Settings for the ProjectorSet Easy Connection Click Location and then New Location Setting the LAN Settings for MacintoshClick Apple Menu and System Preferences Click NetworkClick Show and AirPort Enter a new location name and click the OK buttonInsert the User Supportware 3 CD-ROM into the CD-ROM drive Installing Image Express UtilityInstallation UninstallationConnecting to a projector Using Image Express UtilityPage Using Image Express Utility Click Tools on the menu bar, and click Start Sending Stopping/Restarting Image TransmissionExiting Image Express Utility Click Tools on the menu bar, and click Stop SendingSetting the LAN Settings for Macintosh Setting the LAN Settings for the ProjectorClick Apple Menu System Preferences Click the Apply Now button Click the TCP/IP tab Select Manually in Configure IPv4Page For Information About the Downloading ServiceSecond edition October Image Express Utility For Mac OS User ’s Guide