Microsoft CP-D31N user manual Mail Alerts, Mail Settings

Page 34

3. Network Functions

3.2 E-mail Alerts

The projector can automatically send an alert message to the speciﬁed e-mail addresses when the projector detects a certain condition that is requiring maintenance or detected an error.

NOTE • Up to ﬁve e-mail addresses can be speciﬁed.

•The projector may be not able to send e-mail if the projector suddenly loses power.

Mail Settings (19)

To use the projector’s e-mail alert function, please conﬁgure the following items through a web browser.

Example: If the IP address of the projector is set to 192.168.1.10:

1)Enter “http://192.168.1.10/” into the address bar of the web browser.

2)Enter the Administrator ID and password and click [Logon].

3)Click [Port Settings] on the main menu.

4)Click [Enable] check box to open the SMTP Port.

5)Click [Apply] button to save the settings.

NOTE • A Network Restart is required after the SMTP Port conﬁguration settings have changed. Click [Network Restart] and conﬁgure the following items.

6)Click [Mail Settings] and conﬁgure each item. Refer to the item 3.1.5 Mail Settings (19) for further information.

7)Click [Apply] button to save the settings.

NOTE • Click [Send Test Mail] button in [Mail Settings] to conﬁrm that the e-mail settings are correct. The following mail will be delivered to the speciﬁed addresses.

Subject line	:Test Mail	<Projector name>
Text	:Send Test Mail
	Date	<Testing date>
	Time	<Testing time>
	IP Address	<Projector IP address>
	MAC Address	<Projector MAC address>

34

Image 34

Contents MY Image Still Image Transfer Display Thank you for purchasing this projectorWeb control Messenger FunctionNetwork Functions Content Main functionsEquipment connection and network setting Conﬁguring and controlling the projector via a web browserConﬁguring and controlling via a web browser MY Image Still image Transfer DisplayMessenger Function Required equipment preparation Equipments connection Manual network connection settingNetwork settings Open Network Connections. .2.2.bManual network connection setting Set IP address, subnet mask and default gateway for computerSetting automatically About IP address Setting manuallyFor example Internet Option setting Click3.c Local Area Network LAN Settings window Check connectionConﬁguring and Controlling the Projector via a Web Browser Projector Management using SnmpCommand Control via the Network Mail AlertsConﬁguring and Controlling the Projector via a Web Browser Conﬁguring and controlling the projector via a web browser Password LogonNetwork Information Displays and conﬁgures network settings Port Settings Displays and conﬁgures communication port settingsClick Apply button to save the settings Send mail Mail SettingsDisplays and conﬁgures e-mail addressing settings Smtp Server AddressAlarm Alert SettingsDisplays and conﬁgures failure & alert settings Authentication FailureAlert Items are shown below Schedule Settings Displays and conﬁgures schedule settingsDescription Schedule Schedule settings are shown belowDate Month/Day Displays and conﬁgures the date and time settings Date/Time SettingsFirst, 2, 3, 4, Last Time difference CycleSecurity Settings Community name Conﬁgures the community name if Snmp is usedUp to 64 alphanumeric characters Projector Control Adjusts the vertical picture position Adjusts the horizontal picture positionHdmi Detected Projector Status Displays the current projector statusRestarts the projector’s network connection When Logoff is clicked, the Logon menu is displayedNetwork Restart LogoffMail Alerts Mail Alerts Projector Management using Snmp Snmp SettingsEvent Scheduling Event Scheduling Date/Time Settings Still Image Transfer MY Image Still Image Transfer Display Messenger Function Messenger Function Command Control via the Network Communication PortCommand Control via the Network Header Data length RS-232C command Check Sum Connection Command FormatReply Error code TCP #9715Reply Data format Authentication Automatic Connection BreakConnecting devices LAN port Control portCommunication setup ConditionTransmission method OFF 1s 2s 3s OFFHALF-DUPLEX FULL-DUPLEX