DLP® Projector – User’s Manual
Installation II Menu
Press the Menu button to open the OSD menu. Press the cursor ◄► button to move to the Installa- tion II menu. Press the cursor ▲▼ button to move up and down in the Installation II menu. Press ◄► to change values for settings.
Item
Auto Source
Auto Power Off (min.)
Auto Power On
Fan Speed
Lamp Mode
Advanced
Factory Reset
Status
Press the cursor ◄► button to enable or disable automatic source detection. (Range: On ~ Off)
Press the cursor ◄► button to enable or disable automatic shutdown of lamp when no signal.
Press the cursor ◄► button to enable or disable automatic power On when AC power is supplied.
Press the cursor ◄► button to toggle between Normal and High fan speeds. Note: We recommend selecting high speed in high temperatures, high humid- ity, or high
altitude areas.
Press the cursor ◄► button to select the lamp mode for higher brightness or lower brightness to save lamp life.
Press 
(Enter) / ► to enter the Advanced menu. See Advanced Feature on page 30.
Press 
(Enter) / ► to reset all items to factory preset values.
Press 
(Enter) / ► to enter the Status menu. See page 34 for more information on Status.
– 29 –