Mitsubishi Electronics S490, X490, X500 Lamp replacement, Interval of the lamp replacement

Page 23

Lamp replacement

The lamp is designed to project the image on the LCD panels. When the lamp no longer functions, replace it with a new one.

Caution:

•Do not remove the lamp immediately after using the projector, you may get burned because of the high temperature of the lamp.

•When you replace the lamp, press the power button to power off, then wait for 120 seconds in stand-by mode to allow the lamp and LCD panels to cool. Turn off the main switch, unplug the power cord from the outlet, and wait one hour so that the lamp is cooled to the touch.

•Do not remove the lamp except for replacement. Careless treatment can cause injury or fire.

•Do not touch the lamp element directly. It may break and cause you to injure or burn yourself.

•Be sure not to drop the lamp lid screw into the pro- jector. Also be sure not to insert metal or any flam- mable objects, it may cause fire or electric shock. If any objects are inserted, please unplug and contact your dealer.

•Install the lamp securely, failure may cause a fire.

•If the light bulb part breaks, some small glass frag- ments may fall out through the small cooling grill, and sticks to the inside of projector or the lamp box. When taking the lamp out, make sure to turn over the projector and hold the handle of the lamp box to avoid injury from the glass fragments.

•Never shake the lamp or hold it in front of your face after removing the lamp box. The glass fragments may fall out and cause injuries to your eyes and so on.

1.Reverse the projector gently.

2.Remove the lamp cover using the

rod provided with the optional lamp

 

or a rod such as a

 

precision screw-

1

driver in the direc-

 

2

tion of the arrow as indicated.

7. Put the handle back to the hold- (a) ing point.

•Make sure that the handle is locked.

8.Tighten up the screws (a) using a phillips screwdriver (+).

9.Close the lamp cover.

How to reset the operation time meter

Plug in the power cord, switch on the projector, and reset lamp time by pressing the $, % and POWER buttons on the contro panel simultaneously.

Important:

•If the 3 buttons was not pressed at the same time, the lamp time may not be reset.

•Please confirm the TEMP indicator illuminates about 2 seconds and the lamp time has been reset.

•The projector will not turn on if you do not secure the lamp lid.

•You must reset the operation time meter after you replace the lamp.

•Do not reset the operation time meter unless the lamp has been replaced.

Caution:

•Do not spill liquid on the lamp or place it near flam- mable objects or where children can touch it. Oth- erwise, it could cause injury or fire.

•Be sure that the projector guide is firmly inserted between the right and left lamp guides.

Interval of the lamp replacement

The interval of the lamp replacement about 1,500 hours of consecutive use. Replacement span may differ according to operating environment, and may be shorter than 1,500 hours. Decreases in luminescence and/or color brightness will indi- cate that the light source lamp needs to be replaced. When lamp operation time exceeds 1,000 hours*1, the indicator will flash alternately between green and red (while the lamp is in operation; when the lamp is not in operation, the indi- cator will appear red only). When the lamp has been used for about 1,400 hours*1, the message “LAMP!!.” will appear

ENGLISH

3.Loosen screws (a) using a phillips screwdriver (+), and remove them.

4.Pull up the handle.

5.Hold onto the projector by the

handle as you pull out the lamp.

•Pull the lamp out of the projector slowly. Should the light bulb be bro- ken, glass fragments will spill out if the lamp is pulled out too quickly.

•Once the lamp has been removed, do not spill liquid on it, place it near flammable objects or where chil- dren can touch it. Otherwise, it will cause injury or fire.

6.Insert the new lamp securely into the projector body in the right di- rection.

•Make sure that the two position- ing bosses (b) fit to the lamp posi- tioning holes before inserting the lamp.

(a)

Handle

(b)

on the screen for one minute everytime the power is turned on. When the lamp has been used for about 1,500 hours*1,*2, the projector will automatically shut off for safety and the power indicator light will be red. The projector cannot be used until the lamp has been replaced and operation timer has been reset.

Caution:

•The lamp is fragile. If broken, be careful not to cut your- self with glass fragments.

•The replacement span of the lamp depends on the envi- ronment. For replacement lamps, please contact your dealer.

The projector automatically shuts off when the lamp is used up in about 1,500 hours*1,*2 and cannot be used until the lamp is replaced and the internal timer is reset.

*1) When LAMP MODE of the INSTALLATION menu is set to STANDARD.

*2) When LAMP MODE is set to LOW, the duration will be extended maximum up to 2,000 hours.

EN – 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents 0 0 X 4 9 0 S 4 9 For X500U only For X500U onlyContents Important safeguards Do not modify this equipment 15 14 Foot adjustment buttons Left/Right Terminal boardOverview Air inlet cover Lamp cover Adjustment foot Left/RightAbout laser beam Using the wired remote control Using the remote controlBattery installation Operation area for wireless control systemScreen InstallationOrientation of the projector Projector + DVD player or Hdtv decoder Basic connectionsProjector + AV equipment About DDC For DVI connection For using MacintoshProjector + Personal computer For computer with DVI terminal For X500U onlyGetting ready for projection Adjusting the angle of projectionPreparing the projector for operation Button To operate projector power onAV mute Volume from the speakerTurning off the projector Basic operation Menu operationThis projector in a room where the light and shade varies When sRGB is ON, Color Matrix can’t be adjustedWhen sRGB is OFF, the image will become darker When Color Temp is set to other than StandardSelect the user setting User memory for signal settingMemorizing the setting Initialite the setting which has been changed DefaultColor matrix Picture adjustmentAdjusting the image Color temperatureAdjustment from personal computer Still Advanced features for presentationExpand Picture in Picture PinPOperation Mouse remote controlProjector + computer with USB connector Projector + computer with PS/2 connectorConnection with a computer Setting ComputersWhat you can do with HUB Example of Network SystemHow to reset the operation time meter Lamp replacementInterval of the lamp replacement Cleaning the lens MaintenanceCleaning the air-filter Cleaning the projector and the ventilation slotsProblems Cause Possible Solutions TroubleshootingAbnormal condition IndicatorsNormal condition Specifications What’s included in the box ConnectorsDimensional drawings mm Replacement part Option / Not included in the boxCGA70 VERT.SYNC Hold On Begin END 871D340B30 Connection Control projector by using a personal computerControl command diagram InterfaceControl sequence Operation commandsComputer input commands For X500U only How to set the gradeReading command diagram Volume commandsRemote commands Menu setting commands Example 1 Set the Auto Power on to on

S490, X500, X490 specifications

Mitsubishi Electronics has long been known for its commitment to innovation and excellence in the field of electronics, and their latest offerings, the X490, S490, and X500 series, are no exception. These models represent a culmination of advanced technology and user-centric features, making them ideal for various applications across different industries.

The X490 model is designed to impress with its high-resolution LCD display, offering vibrant colors and exceptional clarity. It incorporates advanced image processing technology that ensures sharp visuals, which is essential for detailed presentations or graphical content. Furthermore, the X490 features multiple connectivity options, including HDMI, VGA, and USB, allowing seamless integration with different devices, such as computers, tablets, and smartphones.

Building on the strengths of the X490, the S490 introduces enhancements in audio output, making it a perfect choice for environments where sound quality is paramount. The S490 is equipped with powerful built-in speakers and advanced sound processing algorithms that ensure clear audio reproduction, which is ideal for multimedia presentations. Additionally, it supports wireless connectivity, enabling users to connect devices without the hassle of cables.

The X500 model stands out as a premium option, integrating cutting-edge technologies that cater to the needs of professionals. It features an ultra-high-definition display with outstanding color accuracy, which is crucial for applications in graphic design, video editing, and other creative fields. The X500 also boasts smart features, including ambient light sensors that adjust brightness according to the surrounding environment, optimizing visibility and reducing eye strain.

All three models are built with durability in mind. Mitsubishi Electronics incorporates robust materials and advanced engineering techniques to ensure reliable performance in various settings, from corporate boardrooms to educational institutions. Their energy-efficient designs not only help reduce operational costs but also align with modern sustainability efforts.

User-friendly interfaces and intuitive controls make these models accessible to users of all skill levels. Whether it’s setting up a display for a presentation, adjusting settings for optimal performance, or navigating through different inputs, Mitsubishi Electronics has streamlined the user experience.

In conclusion, the Mitsubishi Electronics X490, S490, and X500 series offer a blend of high-quality visuals, superior sound, connectivity, and durability. These models are equipped with cutting-edge technologies, making them ideal for a wide range of professional environments, from education to corporate settings. With these advancements, Mitsubishi continues to set the standard for excellence in the electronics industry.
Top Page Image Contents