Adjusting projected images (continued)
To adjust the tone of white (COLOR TEMP.):
You can select a preset color temperature (white tone) using the menu. (See page 22 for menu setting.)
1.Display the IMAGE menu.
2.Select COLOR TEMP. by pressing the or button.
3.Select your desired color temperature by pressing the or button.
To cancel the menu:
4. Press the MENU button.
To adjust the tone of white (To customize the color temperature):
To customize (and store) the color temperature to your preference, carry out the following procedure. (See page 22 for menu setting.)
1.Select COLOR TEMP. in the IMAGE menu.
2.Press the or button to select USER 
.
3.Press the ENTER button.
4.Press the or button to select the desired item.
5.Press the or button to adjust the selected item.
6.Repeat steps 4 and 5 for optimum adjustment results.
To cancel the menu:
7. Press the MENU button.
To enable the stored color temperature:
1. Set COLOR TEMP. to USER 
in the IMAGE menu.
COLOR
CONTRAST R | 0 |
|
|
CONTRAST G | 0 |
|
|
CONTRAST B | 0 |
|
|
BRIGHTNESS R | 0 |
|
|
BRIGHTNESS G | 0 |
|
|
BRIGHTNESS B | 0 |
|
|
About color temperature
There are different kinds of white color. Color temperature is a way to show the differences in white. White of which temperature is low appears reddish. When the color temperature rises, white appears bluish. For example, you can change the color temperature using the following procedures.
To raise the color temperature: Increase the CONTRAST B (blue) and decrease the CONTRAST R (red).
To reduce the color temperature: Decrease the CONTRAST B (blue) and increase the CONTRAST R (red).
•If you set all of CONTRAST R, G, and B to negative values, the original brightness of the image can’t be obtained even when you maximize CONTRAST in the IMAGE menu.
Color Enhancer
You can set the
With the IMAGE menu: |
|
|
| |||
1. | Display the IMAGE menu. |
|
|
| ||
2. | Select COLOR ENHANCER by pressing the or button. |
|
|
| ||
COLOR |
| AUTO | ||||
3. | Select USER |
| by pressing the or button. | ENHANCER |
|
|
|
|
|
| |||
4. | Press the ENTER button. |
|
|
| ||
COLOR |
| |||||
5. | Select an item you want to set. |
|
|
| ||
GAMMA MODE |
| DYNAMIC | ||||
GAMMA mode |
|
| ||||
BrilliantColorTM |
| 10 | ||||
Use this item to set the gamma optimally. |
|
|
| |||
|
|
| ||||
DYNAMIC ……Select when viewing images supplied from the computer. |
|
|
| |||
NATURAL ……Select when viewing images supplied from the video device. |
|
|
| |||
DETAIL ………Select when viewing images of which brightness should be kept relatively low, such as movies and
music performance.
BrilliantColorTM
Use this item to make the colors having medium brightness such as yellow and skin tone look natural. Press the button to decrease the value to lessen the effect. Press the button to increase the value to heighten the effect. (BrilliantColor™ doesn’t work at value 0.)
6. Select a setting value by pressing the or button.
•You can adjust Color Enhancer also by pressing the CE button on the remote control.
•For more enhanced color reproduction, set BrilliantColorTM to 0. The white portion of the color wheel will be disa- bled and you can reproduce
With the remote control:
1.Press the CE button on the remote control.
A window for color enhancer adjustment appears on the upper right of the screen.
2.Press the or button to select USER 
.
3.Press the ENTER button.
4.Press the or button to select GAMMA MODE or BrilliantColor™.
5.Press the or button to adjust the selected item.