Mitsubishi Electronics WD8700U manual 00CEU1GS2

[Example 3] When checking the TINT setting (when the TINT is set to +10). (Values enclosed in quotation marks are ASCII codes.):

• When ID is not specified:

Command sent from the PC, etc.	Status code returned	Description
	from the projector
‘30’ ‘30’ ‘53’ ‘0D’		Command for checking the
00S		TINT setting (ID command is
		omitted.)
	‘30’ ‘30’ ‘53’ ‘2B’ ‘31’ ‘30’ ‘0D’	Check result (+10)
	00S+10	(The statuses are echoed back
		as many as the number of the
		connected projectors.)

• When ID is specified (when the command is sent to the projector with the ID of “01” or “ALL”):

Command sent from the PC, etc.	Status code returned	Description
	from the projector
‘30’ ‘30’ ‘3B’ ‘30’ ‘31’ ‘3B’ ‘53’ ‘0D’		Command for checking the
00;01;S		TINT setting is sent to the
		projector with the ID of “01” or
		“ALL.”
	‘30’ ‘30’ ‘3B’ ‘30’ ‘31’ ‘3B’ ‘53’ ‘2B’ ‘31’ ‘30’ ‘0D’	Check result (+10)
	00;01;S+10	(The status is echoed back
		from the projector with the ID
		of “01” or “ALL.”)

[Example 4] When setting the GAMMA MODE of the COLOR ENHANCER-USER to DETAIL. (Values enclosed in quotation marks are ASCII codes.):

• When ID is not specified:

Command sent from the PC, etc.	Status code returned	Description
	from the projector
‘30’ ‘30’ ‘43’ ‘45’ ‘55’ ‘31’ ‘47’ ‘53’ ‘32’ ‘0D’		Command for setting the
00CEU1GS2		picture control (ID command is
		omitted.)
	‘30’ ‘30’ ‘43’ ‘45’ ‘55’ ‘31’ ‘47’ ‘53’ ‘32’ ‘0D’	Command receipt confirmation
	00CEU1GS2	(The statuses are echoed back
		as many as the number of the
		connected projectors.)

• When ID is specified (when the command is sent to the projector with the ID of “01” or “ALL”):

Command sent from the PC, etc.	Status code returned	Description
	from the projector
‘30’ ‘30’ ‘3B’ ‘30’ ‘31’ ‘3B’ ‘43’ ‘45’ ‘55’		Command for setting the
‘31’ ‘47’ ‘53’ ‘32’ ‘OD’		GAMMA MODE of the COLOR
00;01;CEU1GS2		ENHANCER-USER is sent to
		the projector with the ID of “01”
		or “ALL.”
	‘30’ ‘30’ ‘3B’ ‘30’ ‘31’ ‘3B’ ‘43’ ‘45’ ‘55’	Command receipt confirmation
	‘31’ ‘47’ ‘53’ ‘32’ ‘OD’	(The status is echoed back
	00;01;CEU1GS2	from the projector with the ID
		of “01” or “ALL.”)

18