Mitsubishi Electronics HC3 Advanced features, Password function, To enable the password function

Advanced features (continued)

Password function

This projector is equipped with the password func- tion that is designed for prevention of theft and wrong operation by children and restriction on operation by other than specified users.

MENU ACCESS ............ All the buttons except for

the POWER button on the projector are disabled. (The buttons on the remote control are enabled.) You can use this mode as a measure of prevention of wrong operation by children and restriction on operation by other than specified users.

To enable the password function:

1.Display the FEATURE menu.

2.Press the { or } button to select PASSWORD FUNCTION.

3.Press the ENTER button.

•The screen for setting the password function will appear.

4.Press the ENTER button.

•The screen for entering the password will appear.

PASSWORD

O K CANCEL

5.	Press the { or } button to select a number from
	0 to 9.
6.	Press the % button.
	• You can set the next digit.
7.	Repeat steps 5 and 6 to enter the four-digit pass-
	word.
8.	Press the % button, select OK, and press the
	ENTER button.
	• If you enter a wrong password, an error mes-
	sage will appear.
	• To cancel the procedure, press the % button,
	select CANCEL, and press the ENTER button.
	• You can cancel the procedure by pressing the

opt.

FEATURE

XGA60

MENU button alternatively.

PASSWORD FUNCTION

LOCK	OK
UNLOCK	OK

4.Press the ENTER button.

• The screen for entering a password will appear.

PASSWORD

CONFIRM

O K CANCEL

5.Press the { or } button to select a number from 0 to 9.

6.Press the % button.

•You can set the next digit.

7.Repeat steps 5 and 6 to set a four-digit password.

8.Enter the password again for confirmation using the same steps.

9.Select OK, and press the ENTER button.

•If the entered passwords don’t match, an error message will appear.

•To cancel the procedure, select CANCEL, and press the ENTER button.

•You can cancel the procedure by pressing the MENU button alternatively.

To cancel the password function:

1.Display the FEATURE menu.

2.Press the { or } button to select PASSWORD FUNCTION.

3.Press the ENTER button.

•The screen for canceling the password function will appear.

Important:

•If you forget your password, keep pressing the MENU and ENTER buttons on the control panel at the same time about three seconds to cancel the password function.

opt.

FEATURE

XGA60

PASSWORD FUNCTION

LOCK	OK
UNLOCK	OK

EN – 22