Mitsubishi Electronics XL6U user manual Basic operation

Page 14

Basic operation (continued)

Power-off

Use the following procedure to turn off the projector. Do not turn off the projector by unplugging the power cord while the lamp is on. Unplugging while the lamp is on degrades the lamp’s performance and causes failure in the projector.

1.Press the POWER button.

The message “POWER OFF? YES : PRESS AGAIN” appears on the screen.

To cancel, press any button except the POWER button. (Some buttons on the remote control don’t function for cancel.)

2.Press the POWER button within 10 seconds again.

The lamp will go out and the STATUS indicator will start blinking.

Though the lamp goes out at this second press of the POWER button, the air outlet fans continue operating for one minute to cool down the lamp and LCD panels. The STATUS indicator will stop blinking.

3.Unplug the power cord.

The POWER indicator will go out.

If the power cord should be unplugged accidentally while either the air inlet fan or the air outlet fans are operating or the lamp is on, allow the projector to cool down for 10 minutes with the power off. To light the lamp again, press the POWER button. If the lamp doesn’t light up immediately, repeat pressing the POWER button two or three times. If it should still fail to light up, replace the lamp.

Important:

When storing the projector in the provided carrying case, the lens should face up.

AUTO POSITION button

When the image isn’t projected in the right position with COMPUTER selected as the input source, follow the procedure below.

1.Project a bright image such as the “Recycle Bin” window on the full screen.

2.If the screen saver is running, turn it off.

3.Press the AUTO POSITION button.

If the image is still not in the right position, adjust the image position using the SIGNAL menu.

Volume from the speaker

Press the VOLUME + or – button to change the volume from the speaker.

The volume control bar will appear on the screen.

VOLUME

15

The volume control bar will disappear about 10 seconds after the VOLUME button is released.

The VOLUME buttons don’t function while the menu selection bar or the menu is being displayed.

When a high-level audio signal, such as a DVD audio signal, is supplied to the AUDIO IN terminal, the output from the speaker may be distorted.

AV mute

The video and audio signals are temporarily muted when the MUTE button is pressed. To cancel muting, press the MUTE button again.

If MUTE MODE in the INSTALLATION menu is set to IMAGE, the splash screen will appear when the MUTE button is pressed.

You can alter the splash screen optionally. See page 21.

When muting starts, the lamp mode becomes LOW, darkening the displayed image. This is not a product malfunction.

ANAMORPHIC mode

When playing DVD discs containing data of letterboxed image, press the 16:9 button. Exit the ANAMORPHIC mode by pressing the 16:9 button again.

Caution:

After using the projector, wait 1 minute for the air outlet fans to stop. Then unplug the power cord from the wall outlet.

The lamp can’t be lit again for 1 minute after turned off for safety purpose. It will take another 1 minute for the STATUS indicator to go out. If you want to turn on the projector again, wait until the indicator goes out, and then press the POWER button.

The air outlet fans rotate faster as the temperature around the projector rises.

When the temperature around the projector rises high, the sign “TEMPERATURE!!” blinks red on the screen. If the temperature stays high, the lamp will go out automatically.

EN – 14

Image 14
Contents XL6U When using the projector in Europe Compliance NoticeContents Important safeguards Do not unplug the power cord during operation Do not keep using the damaged projectorDo not look into the lens when the projector is operating Clean the air-filter once a monthTerminal panel OverviewControl panel Remote control Bottom sideOperation range of the remote control Remote controlBattery installation Reception angle verticalFront projection InstallationLayout of the projector Front projection, ceiling mountingProjector + DVD player or Hdtv decoder Basic connectionsProjector + AV device VCR, etcComputer Projector + ComputerFor Macintosh About DDCPreparation for projection Adjustment of the projection anglePreparation Following casesPower-on Basic operationBasic operation Basic operation InstallationMenu operation Menu operation Terminal when Video is chosen as the source. Select Expand Mode .. Choose the mode for enlarging the image. SeeAudio in terminal when Computer is chosen as Computer Video mode to always output the audio that isColor temperature Image adjustmentImage adjustment About color temperatureAdjustment of the image from the computer Simple adjustment methodStill Advanced featuresExpand Set the background color Setting of the image displayed during startup or mutingSetting procedure Set the image sizeTo cancel the password function Advanced featuresPassword function To enable the password functionInterval of lamp replacement Lamp replacementReset of the lamp operation time Cleaning of the projector and the ventilation slots MaintenanceCleaning of the air-filter Filter cover Cleaning of the lensTroubleshooting Images arent projected on the screenTroubleshooting Images arent projected correctlyOthers Normal condition IndicatorsPower Status Abnormal conditionSpecifications Kensington LockDimensional drawings unit mm SpecificationsConnectors Replacement part Option / Not included in the boxCGA70 Mitsubishi Electric Corporation
Related manuals
Manual 64 pages 19.07 Kb

XL6U specifications

Mitsubishi Electronics has made significant strides in the field of home entertainment with its cutting-edge XL6U projector. This high-performance projector stands out for its versatility and advanced features, catering to both business and personal use. One of the defining qualities of the XL6U is its impressive brightness, producing up to 6000 ANSI lumens. This powerful output ensures clear and vibrant images even in well-lit environments, making it an excellent choice for conference rooms, classrooms, or home theaters.

The XL6U utilizes DLP (Digital Light Processing) technology, which is known for its exceptional color accuracy and sharpness. With a native resolution of 1920x1080, the projector delivers stunning Full HD visuals, bringing every detail to life. This makes it particularly well-suited for displaying high-definition video content, from presentations to film screenings.

Moreover, the XL6U supports both 2D and 3D projection capabilities. This feature enhances user experience by allowing viewers to enjoy immersive 3D films, making it an ideal option for gaming and cinematic experiences. The projector also supports the latest HDMI standards, ensuring compatibility with a variety of media devices such as Blu-ray players, gaming consoles, and streaming devices.

In terms of connectivity, the XL6U offers a broad range of options, including USB, VGA, and HDMI ports. This variety allows for easy integration with existing systems, simplifying setup and usage. Additionally, the projector's built-in speakers produce clear audio, although users have the option to connect external audio systems for improved sound quality.

The XL6U is designed with longevity in mind. Its high-performance lamp provides up to 7500 hours of usage in eco mode, reducing maintenance costs and extending the life of the projector. This durability is complemented by a user-friendly operation interface, enabling both novice and experienced users to navigate its features with ease.

Overall, the Mitsubishi Electronics XL6U is a robust projector combining high brightness, excellent image quality, and versatility in connectivity. It caters to a wide range of applications, from business presentations to home entertainment, making it a smart investment for those seeking a reliable and high-performing projection solution. With its array of advanced technologies and features, the XL6U exemplifies Mitsubishi’s commitment to innovation and quality in the electronics market.