Mitsubishi Electronics XL1550U Ascii Wall Screen Beige WSY, Wsb, Wsg, Wall Screen Pink WSP, Scp

ITEM			Function				Data
	Character			ASCII
WALL SCREEN (BEIGE)	WSY	57h	53h	59h	1–5
WALL SCREEN (LIGHT BLUE)	WSB	57h	53h	42h	1–5
WALL SCREEN (LIGHT GREEN)	WSG	57h	53h	47h	1–5
WALL SCREEN (PINK)	WSP	57h	53h	50h	1–5
LAMP MODE	LM	4Ch 4Dh			0	(STANDARD), 1 (LOW)
AUTO POWER ON	APON	41h	50h	4Fh 4Eh	0	(OFF), 1 (ON)
AUTO POWER OFF	APOF	41h	50h	4Fh 46h	00 (OFF), 05, 10, 15, 30, 60
SPLASH SCREEN	SS	53h	53h		0	(OFF), 1 (ON)
BACK COLOR	BB	42h	42h		0	(BLACK), 1 (BLUE), 2 (IMAGE)
MUTE MODE	MM	4Dh 4Dh			0	(BLACK), 1 (IMAGE)
IMAGE REVERSE	IR	49h	52h		0	(OFF), 1 (MIRROR), 2 (INVERT),
					3	(MIRROR INVERT)
ASPECT	SC	53h	43h		0	(AUTO), 1 (16:9), 2 (REAL), 3 (FULL)
ASPECT (Position of 16:9	SCP	53h	43h	50h	0	(CENTER), 1 (UPPER), 2 (LOWER)
image)
PASSWORD FUNCTION	PSLOCK	50h	53h	4Ch 4Fh 43h	0**** (UNLOCK), 1**** (DISPLAY INPUT),
		4Bh			2**** (MENU ACCESS), 3**** (SPLASH ID SCREEN)
					**** is a 4 to 8-digit password comprised of any
					figures 1 to 4.
MENU POSITION	MP	4Dh 50h			0	(Upper left), 1 (Lower right)
CINEMA MODE	CINE	43h	49h	4Eh 45h	0	(OFF), 1 (AUTO)
VIDEO SIGNAL	VS	56h	53h		0	(AUTO), 1 (NTSC), 2 (PAL), 3 (SECAM),
(VIDEO only)					4	(4.43NTSC), 5 (PAL-M), 6 (PAL-N), 7 (PAL-60)
SET UP	STU	53h	54h	55h	0	(AUTO), 1 (OFF), 2 (3.75%), 3 (7.5%)
SCART INPUT	SRT	53h	52h	54h	0	(OFF), 1 (ON)
LANGUAGE	LG	4Ch	47h		0	(	), 1 (English), 2 (Español), 3 (Deutsch),
					4	(Français), 5 (Italiano), 6 ( ), 7 (		),
					8	(	), 9 (PORTUGUÊS)
RESET ALL	RSTALL	52h 53h 54h 41h 4Ch 4Ch
MEMORY CALL	MMC	4Dh 4Dh 43h			0	(AUTO), 1 (MEMORY1), 2 (MEMORY2)
HORIZ.POSITION	HP	48h	50h		+ (increment), - (decrement)*1
VERT. POSITION	VP	56h	50h		+ (increment), - (decrement)*1
FINE SYNC.	FN	46h	4Eh		00–31
TRACKING	TRK	54h	52h	4Bh	+ (increment), - (decrement)*1
COMPUTER INPUT	CIN	43h	49h	4Eh	0	(RGB), 1 (YCBCR/YPBPR), 2 (AUTO)
OVER SCAN	VOS	56h	4Fh 53h		00 (90%) – 10 (100%)
HOLD	HLD	48h	4Ch 44h		0	(OFF), 1 (ON)
HOLD BEGIN	HLB	48h	4Ch 42h		00–99
HOLD END	HLE	48h	4Ch 45h		00–99
CLAMP POSITION	CLP	43h	4Ch 50h		001–255
CLAMP WIDTH	CLW	43h	4Ch 57h		01–63
VERT. SYNC	VSC	56h	53h	43h	0	(AUTO), 1 (OFF)
LPF	LPF	4Ch 50h 46h			0	(OFF), 1 (ON)
SHUTTER(U)	SHU	53h	48h	55h	00–20
SHUTTER(L)	SHL	53h	48h	4Ch	00–20
SHUTTER(LS)	SHLS	53h	48h	4Ch 53h	00–20
SHUTTER(RS)	SHRS	53h	48h	52h 53h	00–20

*1) Setting range differs depending on the input signals.

•Some commands are not executed depending on the input signal. The operational restrictions same as those on the menu setting are applied. Refer to “Menu operation” in the User Manual for more details.

How to set the value

Use the character or ASCII code as shown below to set the value.

Character	+	-	0	1	2	3	4	5	6	7	8	9
ASCII	‘2Bh’	‘2Dh’	‘30h’	‘31h’	‘32h’	‘33h’	‘34h’	‘35h’	‘36h’	‘37h’	‘38h’	‘39h’

7