Mitsubishi Electronics XL6U user manual Basic operation, Power-on

Page 13

Basic operation

POWER STATUS

3, 1, 2

AUTO POSITION

 

 

COMPUTER KEYSTONE VIDEO

5

ENTER

5

 

MENU

 

3, 1, 2

6

5

COMPUTER VIDEO

MENU

ENTER

STILL

16:9

AUTO

EXPAND KEYSTONE

POSITION

4

Power-on

1.Turn on the device connected to the projector first.

2.Plug the power cord in the wall outlet.

•The POWER indicator lights up.

•If the power cord is unplugged from the wall outlet before the projector is cooled down completely after use, the fans may start rotating when the power cord is plugged in next time and the POWER button may not function. In this case, wait for the fans to stop and press the POWER button to light the indicator.

3.Press the POWER button.

•It may take about 1 minute for the lamp to light up.

•The lamp occasionally fails to light up. Wait a few minutes and try to light the lamp again.

•After the POWER button is pressed or the lamp mode is switched, the image may flicker before the lamp becomes stable. This is not a product malfunction.

•The STANDARD lamp mode is activated by default whenever the projector is turned on. When the LOW lamp mode has been chosen, the default STANDARD lamp mode is switched to the LOW lamp mode in 1.5 minutes.

Indicator

STATUS

POWER

Condition

 

 

Stand-by

-

Red

When the lamp is on.

Green

Green

When the lamp is off temporarily.

-

Red

MUTE - +

VOLUME

Important:

•The projector starts warming up when the POWER button is pressed. During the warm-up process, images may appear dark and no commands are accepted.

•By blinking red, the STATUS indicator indicates that the lamp should be replaced soon. Replace the lamp when the STATUS indicator blinks red. (See page 28.)

•Images may not be projected with good quality in an extremely hot or cold environment. (This is not a product malfunction.)

4.Adjust the focus by turning the focus ring.

5.Choose your desired external input source using the COMPUTER or VIDEO button.

•The input source is switched between COMPUTER1 and COMPUTER2 at every press of the COMPUTER button.

•The input source is switched between VIDEO and S-VIDEO at every press of the VIDEO button.

•The projector automatically selects the appropriate signal format. The selected signal format is displayed on the screen.

•The COMPUTER and VIDEO buttons don’t function while the menu is being displayed.

•Images supplied from the computer may flicker. Press the $ or % button on the remote control to reduce flicker, if it occurs.

6.Adjust the image size by turning the zoom ring.

•If necessary, adjust the focus and zoom again.

ENGLISH

EN – 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents XL6U Compliance Notice When using the projector in EuropeContents Important safeguards Do not look into the lens when the projector is operating Do not keep using the damaged projectorDo not unplug the power cord during operation Clean the air-filter once a monthControl panel OverviewTerminal panel Bottom side Remote controlBattery installation Remote controlOperation range of the remote control Reception angle verticalLayout of the projector InstallationFront projection Front projection, ceiling mountingProjector + AV device Basic connectionsProjector + DVD player or Hdtv decoder VCR, etcFor Macintosh Projector + ComputerComputer About DDCPreparation Adjustment of the projection anglePreparation for projection Following casesBasic operation Power-onVolume from the speaker Power-offAnamorphic mode Auto Position buttonBasic operation Menu operationCOLOR, TINT, and Gamma Mode cant be adjusted Reproducibility When sRGB is ON, Color MATRIX, Color TempColor TEMP. .... Use to adjust the color temperature. See Using the projector mounted on the ceilingAudio in terminal when Computer is chosen as Expand Mode .. Choose the mode for enlarging the image. SeeTerminal when Video is chosen as the source. Select Computer Video mode to always output the audio that isImage adjustment Image adjustmentColor temperature About color temperatureSimple adjustment method Adjustment of the image from the computerExpand Advanced featuresStill Setting procedure Setting of the image displayed during startup or mutingSet the background color Set the image sizeTo cancel the password function Password functionTo enable the password function Reset of the lamp operation time Lamp replacementInterval of lamp replacement Cleaning of the air-filter Filter cover MaintenanceCleaning of the projector and the ventilation slots Cleaning of the lensImages arent projected on the screen TroubleshootingImages arent projected correctly TroubleshootingOthers Normal condition IndicatorsAbnormal condition Kensington Lock SpecificationsDimensional drawings unit mm ConnectorsReplacement part Option / Not included in the box What’s included in the boxCGA70 Mitsubishi Electric Corporation SL6U Compliance Notice SL6U Important safeguards Compliance Notice of FCC Power Status Bottom side Remote control 163 122 114 100 BNC-RCA connector option No connection To PC audio Preparation Status Power Basic operation Menu operation Menu operation Feature Image adjustment Adjustment of the image from the computer Advanced features SL6U Will appear Lamp replacement Maintenance Press the Power button several times Troubleshooting Others Indicators Specifications VLT-SL6LP Expand Mitsubishi Electric Corporation
Related manuals
Manual 32 pages 17.53 Kb

XL6U specifications

Mitsubishi Electronics has made significant strides in the field of home entertainment with its cutting-edge XL6U projector. This high-performance projector stands out for its versatility and advanced features, catering to both business and personal use. One of the defining qualities of the XL6U is its impressive brightness, producing up to 6000 ANSI lumens. This powerful output ensures clear and vibrant images even in well-lit environments, making it an excellent choice for conference rooms, classrooms, or home theaters.

The XL6U utilizes DLP (Digital Light Processing) technology, which is known for its exceptional color accuracy and sharpness. With a native resolution of 1920x1080, the projector delivers stunning Full HD visuals, bringing every detail to life. This makes it particularly well-suited for displaying high-definition video content, from presentations to film screenings.

Moreover, the XL6U supports both 2D and 3D projection capabilities. This feature enhances user experience by allowing viewers to enjoy immersive 3D films, making it an ideal option for gaming and cinematic experiences. The projector also supports the latest HDMI standards, ensuring compatibility with a variety of media devices such as Blu-ray players, gaming consoles, and streaming devices.

In terms of connectivity, the XL6U offers a broad range of options, including USB, VGA, and HDMI ports. This variety allows for easy integration with existing systems, simplifying setup and usage. Additionally, the projector's built-in speakers produce clear audio, although users have the option to connect external audio systems for improved sound quality.

The XL6U is designed with longevity in mind. Its high-performance lamp provides up to 7500 hours of usage in eco mode, reducing maintenance costs and extending the life of the projector. This durability is complemented by a user-friendly operation interface, enabling both novice and experienced users to navigate its features with ease.

Overall, the Mitsubishi Electronics XL6U is a robust projector combining high brightness, excellent image quality, and versatility in connectivity. It caters to a wide range of applications, from business presentations to home entertainment, making it a smart investment for those seeking a reliable and high-performing projection solution. With its array of advanced technologies and features, the XL6U exemplifies Mitsubishi’s commitment to innovation and quality in the electronics market.
Top Page Image Contents