Mitsubishi Electronics SA51 user manual Lamp replacement, Interval of the lamp replacement

Page 22
Screw of the lamp lid
(a)

Lamp replacement

The lamp is designed to project the image on the LCD panels. When the lamp no longer functions, replace it with a new one.

Caution:

7. Put the handle back to the holding point.

M a k e s u r e t h a t t h e handle is locked.

8.Tighten up the screws (a)

• Do not remove the lamp immediately after turning

off the lamp of the projector, you may get burned

because of the high temperature of the lamp.

using a phillips screwdriver

(+).

(a)

• For lamp replacement, press the power button to

power off, then wait for 60 seconds in stand-by mode

to allow the lamp and LCD panels to cool. Then turn

off the main switch, unplug the power cord from

the outlet, and wait one hour so that the lamp is

cooled to the touch.

• Do not remove the lamp except for replacement.

Careless treatment can cause injury or fire.

• Do not touch the lamp element directly. It may break

and cause you to injure or burn yourself.

• Be sure not to drop the lamp lid screw into the pro-

jector. Also be sure not to insert metal or any flam-

mable objects, it may cause fire or electric shock. If

any objects are inserted, please unplug and contact

your dealer.

• Install the lamp securely, failure may cause a fire.

1.Reverse the projector gently.

2.Loosen the screws of the lamp lid on the top cover using a phillips screw-

driver (+) , and remove the lid.

Remove the lamp cover in the direction of the arrow as indicated.

3. Loosen screws (a) using a phillips screwdriver (+).

4. Pull up the handle.

5. Hold onto the projector by the handle as you pull out the lamp.

Pull out the lamp straight upward.

• Once the lamp has been re- moved, do not spill liquid on it, place it near flam- mable objects or where children can touch it.

9. Tighten up the screws of the lamp lid using a phillips screwdriver (+).

How to reset the operation time meter

Plug in the power cord, switch on the projector, and reset lamp time by pressing the $, % and POWER buttons simultaneously.

Caution:

Do not spill liquid on the lamp or place it near flam- mable objects or where children can touch it. Oth- erwise, it could cause injury or fire.

Be sure that the projector guide is firmly inserted between the right and left lamp guides.

Important:

The projector will not turn on if you do not secure the lamp lid.

You must reset the operation time meter after you replace the lamp.

Do not reset the operation time meter unless the lamp has been replaced.

Interval of the lamp replacement

The interval of the lamp replacement about 2,000 hours of consecutive use. Replacement span may differ ac- cording to operating environment, and may be shorter than 2,000 hours. Decreases in luminescence and/or color brightness will indicate that the light source lamp needs to be replaced. When lamp operation time ex- ceeds 1,500 hours, the indicator will flash alternately between green and red (while the lamp is in operation; when the lamp is not in operation, the indicator will appear red only). When the lamp has been used for about 1,900 hours, the message “LAMP!!.” will appear on the screen for one minute. When the lamp has been used for about 2,000 hours, the projector will automati- cally shut off for the safety of the lamp and the power indicator light will be red. The projector cannot be used until the lamp has been replaced and operation timer has been reset.

Caution:

Otherwise, it will cause injury or fire.

(b)

The lamp is fragile. If broken, be careful not to cut

 

yourself with glass fragments.

The replacement span of the lamp depends on the

6. Insert the new lamp se- curely into the projector body in the right direc- tion.

Make sure that the two positioning bosses (b) fit to the lamp positioning holes before inseting the lamp.

EN – 22

environment. For replacement lamps, please con-

tact your dealer.

The projector automatically shuts off af- ter about 2,000 hours, and you cannot use the projector until you replace the lamp.

Image 22
Contents SA51 When using the projector in Europe Compliance NoticeContents Important safeguards Do not modify this equipment Clean the air-filter once a monthNever remove the cabinet If you break or drop the cabinetOverview Bottom side Remote control Battery installation Using the remote controlOperation area Front projection InstallationOrientation of the projector Ceiling mount, Rear projectionProjector + AV equipment Basic connectionsProjector + DVD player or Hdtv decoder For using Macintosh Projector + Personal computerPreparing the projector for operation Adjusting the angle of projectionGetting ready for projection To operate projector power on Auto PositionSound from the speaker Volume from the speakerTurning off the projector AV muteMenu operation Basic operationSelected to COMPUTER. Select 2 Video mode to output Color TEMP... . Adjusts color temperature. SeeInputted to audio input terminal only when the source is When the source is selected to VIDEO. SelectUser memory for signal setting Color temperature Picture adjustmentAdjusting the image Color matrixAdjustment from personal computer Picture adjustment Expand Advanced features for presentationStill Interval of the lamp replacement Lamp replacementHow to reset the operation time meter Cleaning the lens MaintenanceCleaning the air-filter Cleaning the projector and the ventilation grillTroubleshooting Problems Cause Possible SolutionsNormal condition IndicatorsPower indicator Lamp indicator Temp indicator Abnormal conditionSpecifications Rated input LCD panelsReplacement part Option / Not included in the box ConnectorsDimensional drawings mm What’s included in the box871D305A10

SA51 specifications

The Mitsubishi Electronics SA51 is a notable entry in Mitsubishi’s lineup of air conditioning systems, recognized for its energy efficiency and advanced features. Designed to meet the demands of modern residential and commercial spaces, the SA51 series combines innovative technology with stylish aesthetics, providing a comfortable indoor climate throughout the year.

One of the standout features of the SA51 is its commendable energy efficiency rating. The unit employs advanced inverter technology, which allows for variable speed operation. This means that the system can adjust its cooling or heating output based on real-time needs, leading to significant reductions in energy consumption while maintaining optimal comfort levels. The inverter compressor operates at different speeds, ensuring that the system uses only as much power as necessary, which not only reduces energy bills but also lessens the environmental impact.

In addition to its energy-saving capabilities, the SA51 is equipped with a range of intelligent features designed for convenience and user control. The incorporation of smart technology allows for remote operation via mobile devices, empowering users to manage their cooling and heating settings from anywhere. This feature is particularly convenient for those who wish to come home to a perfectly conditioned environment after a long day.

The SA51 stands out with its whisper-quiet operation, making it an ideal choice for bedrooms and workspaces. Mitsubishi has engineered the unit's design to minimize noise, resulting in a tranquil environment free from disruptive air conditioning sounds.

Another significant aspect of the SA51 is its advanced filtration system. Equipped with high-quality filters, the unit not only cools or heats the air but also purifies it, removing dust, allergens, and other pollutants. This is particularly beneficial for individuals with allergies or respiratory issues, ensuring cleaner and healthier indoor air quality.

Durability and reliability are also integral to the SA51’s design. Built with high-quality materials and components, the unit is designed to withstand varying climate conditions while delivering consistent performance over time. With proper maintenance, the system can offer years of dependable service.

In summary, the Mitsubishi Electronics SA51 is a carefully engineered air conditioning solution that embodies efficiency, convenience, and user-centric technology. With its inverter technology, smart features, quiet operation, effective filtration, and robust durability, it stands as a leading option for those seeking comfort in their living or working spaces.