Mitsubishi Electronics XD205 Signal User No need to adjust in normal use, Password Function

3 FEATURE

......................................MENU POSITION	Use to select the position of the menu on the screen, 1.									opt.	XGA60
		(upper left) or 2.			(lower right).
............................................CINEMA MOD	When AUTO is selected, the film mode will be automati-						FEATURE
	cally activated when a film source signal is inputted.								MENU POSITION		1.
	When OFF is selected, the film mode will not be acti-
									CINEMA MODE		AUTO
	vated.
VIDEO SIGNAL	When AUTO is selected, the appropriate video format is						?		VIDEO SIGNAL		AUTO
									ANAMORPHIC		ON
	automatically selected depending on the input signal. If
	the image isn’t displayed correctly, select the desired								PASSWORD		MENU ACCESS
									FUNCTION
	video format manually.							A Ë	LANGUAGE		English
...........................................ANAMORPHIC	Select ON when playing DVD discs containing data of								RESET ALL		OK
	widescreen images.
	This item can not be ON when using Keystone correction.
PASSWORD FUNCTION	Use to change the mode of the password lock or to enable or cancel the password lock. See page 21
	for details.
LANGUAGE	Use to select the language used in the menu. (					/ English / Español / Deutsch / Français / Ital-
	iano /		/	/	/ PORTUGUÊS).
RESET ALL	Use to reset the menu settings (except PASSWORD FUNCTION, and LANGUAGE ).

•CINEMA MODE can be adjusted only when a TV50, TV60, 480i, 576i signal is being displayed.

•When VIDEO SIGNAL is set to AUTO, the image may not be projected with correct colors. Change the setting of VIDEO SIGNAL depend- ing on the input signal in such cases.

4 SIGNAL
HORIZ. POSITION	Use to adjust the horizontal position of the image.
		opt.
			XGA60
VERT. POSITION	Use to adjust the vertical position of the image.
FINE SYNC	Use to synchronize the projector with the PC input signal	SIGNAL
	so that the image is not blurred.	HORIZ. POSITION	0
TRACKING	Use to eliminate image noise such as wide stripes.	VERT. POSITION	0
COMPUTER INPUT	The projector adjusts its settings automatically when
		FINE SYNC.	0
	connected to a DVD player equipped with a component
		TRACKING	0
	video output (Y, CB, CR). When the projector is con-	COMPUTER
			RGB
	nected with a device having an RGB terminal, choose	RRGGBB INPUT
	RGB manually.	SET UP	7.5%
SET UP	When OFF is selected, the black area becomes make	HOLD	ON
	lighter. When 3.5% or 7.5% is selected, the black area	USER	OK
	becomes thicker.
HOLD	Use to adjust the image when flagging occurs near the top of the screen.

5 SIGNAL - USER (No need to adjust in normal use.)

CLAMP POSITION/
		USER
CLAMP WIDTH	Use to correct solid white or solid black in the projected	CLAMP
			0
		POSITION
	image.
		CLAMP WIDTH	1

Important:

•You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is supplied.

ENGLISH

EN-17