Mitsubishi Electronics XD490U user manual Kensington Lock, Others Problem Solution

Page 35

Others

Problem

Solution

 

 

The exhaust vents

• This air comes out after cooling the inside of the projector. You may feel hot, but this is

emit warm air.

not a malfunction.

No audio is output.

• Check that the volume isn't set to low.

 

 

The menu can't be

• The microcomputers inside the projector may be wrongly operating because of noise.

used.

￿ Press the POWER button to turn off the lamp and unplug the power cord from the

 

wall outlet. Wait about 10 minutes, plug the power cord in, and try again.

 

 

“TEMPERATURE!!” is

• This indication appears when the ambient temperature rises high. When the ambient

displayed.

temperature stays high, the lamp goes out.

 

￿ Eliminate any causes of the rise in the ambient temperature.

 

• This indication appears when the air inlet or outlet grille is blocked. When they are kept

 

blocked, the lamp goes out.

 

￿ Remove the objects blocking the air inlet or outlet grille.

The mark appears.

• This mark appears when ineffective operation is carried out. This isn't a product

 

malfunction.

 

 

The remote control

• Check that the batteries are loaded in the remote control or the batteries are not weak.

doesn't function easily

(See page 6.)

or at all.

• Check that the remote control sensor isn't exposed to direct sunlight or fluorescent

 

light. (See page 9.)

 

• Use the remote control within its operation range. (See page 9.)

 

• Use the remote control at least 10 cm away from the projector.

 

 

The buttons on the

• PASSWORD FUNCTION in the FEATURE menu has been set to MENU ACCESS to en-

control panel (except

able the password lock.

for the POWER

￿ Cancel the password lock or contact the person in charge of management of the

button) don’t function.

projector. (See page 28.)

Abnormal sound is

• Because the color wheel spins at a high speed, metallic sounds may be heard in rare

heard.

occasions. Such symptom is not a malfunction.

 

 

If the following problem occurs after the lamp is replaced, check the following first.

Problem

Solution

 

 

The projector does not

• Fit the lamp cover securely. (See pages 31 and 32.)

turn on.

•

Reset the lamp operating time. (See page 32.)

The STATUS indicator

•

Reset the lamp operating time. (See page 32.)

blinks.

 

 

 

 

 

ENGLISH

Kensington Lock

This projector has a Kensington Security Standard connector for use with Kensington MicroSaver Security System. Refer to the information that came with the Kensington System for instructions on how to use it to secure the projector. Please contact Kensington Technology Group below.

Kensington Technology Group

2855 Campus Drive

San Mateo, CA 94403, U.S.A.

Phone : +1- (650)572-2700 Fax : +1- (650)572-9675

EN-35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents XD490 XD460 Risk of Electric Shock Do not Open When using the projector in EuropeContents Important safeguards Place of installation Do not keep using the damaged projectorDo not look into the lens when it is operating Do not unplug the power cord during op- erationPreparing your projector Checking accessoriesInserting the batteries into the remote control Terminal board OverviewControl panel EN-7About the laser beam Remote controlPreparating your projector Bottom sideFront of projector Rear of projector Using the remote controlOperational range of the remote control Reception angleAdjusting the projection angle Setting up your projectorSetting up the screen Basic setupRear projection Wall screenFront projection, ceiling mounting Virtual lens shift Setting up your projectorWhen the aspect ratio of the screen is Screen size and projection distanceViewing computer images Connecting the projector to a computerAbout DDC Plugging the power cordViewing computer images Projecting images AV mute When connecting to a notebook computerExample of the setting procedure for external output To stop projectingViewing video images Connecting the projector to video equipmentConnecting to a video player, etc When a TV tuner or VCR is connectedProjector + DVD player or Hdtv decoder Plugging in the power cordConnecting to video equipment having a DVI-D terminal Viewing video imagesProjecting images Volume from the speaker With the Feature menu Setting the aspect ratioHow to change the settings With the remote controlMenu operation How to set the menusImage menu Available settings in the menusInstallation menu Menu operation Feature menuSignal menu To cancel the menu Adjusting projected imagesTo adjust the brightness Contrast and Brightness To adjust the color Color and TintColor Enhancer Adjusting projected imagesTo adjust the tone of white Color Temp About color temperatureLPF Progressive filter To adjust the vertical positionTo cancel the password function Advanced featuresPassword function To enable the password functionStill ExpandPicture in Picture PinP Operation Advanced featuresMouse remote control Replacing the lamp Interval of lamp replacementReplacing the lamp Cleaning of the projector and the ventilation slotsCleaning of the lens Reset of the lamp operation timeNo image appears on the screen Problem Solution TroubleshootingImages are not displayed correctly TroubleshootingProblem Solution Kensington Lock Others Problem SolutionStatus Condition IndicatorsNormal condition Abnormal conditionSpecifications Replacement part Option / Not included in the boxXGA85 SpecificationsDimension Drawings unit mm ConnectorsMitsubishi Projector Contact Information

XD490U specifications

The Mitsubishi Electronics XD490U is a projector designed to cater to the needs of both professional and educational environments. Its versatility and advanced features make it a popular choice for those looking to deliver impactful presentations and engaging lectures. This model stands out for its blend of performance, convenience, and image quality.

One of the main features of the XD490U is its high brightness, delivering up to 5000 ANSI lumens. This allows for clear and vivid images in well-lit environments, making it suitable for various settings, from classrooms to conference rooms. Coupled with a high contrast ratio, the projector ensures that colors are vibrant and details are sharp, enhancing the overall viewing experience.

The XD490U uses DLP technology, which is well-known for its reliability and excellent color reproduction. DLP projectors like the XD490U are less prone to color decay over time compared to other technologies, ensuring consistent performance throughout its lifespan. The projector supports a native resolution of XGA (1024 x 768), making it ideal for displaying presentations, videos, and images without losing detail.

To enhance usability, the Mitsubishi XD490U features a range of connectivity options. It includes multiple inputs such as HDMI, VGA, and composite video, making it compatible with a variety of devices from laptops to DVD players. This adaptability is essential for environments where multiple devices may be used for presentations.

The XD490U is also equipped with a built-in 10-watt speaker, which provides adequate sound for smaller rooms without the need for additional audio equipment. For larger settings, the projector can easily be connected to external sound systems.

Moreover, the XD490U is designed with user convenience in mind. Its lightweight and portable design make it easy to transport and set up in different locations. The projector also features a quick start-up time, allowing users to begin presentations without lengthy delays.

In terms of energy efficiency, the XD490U incorporates eco-conscious technologies that help reduce power consumption during operation and standby modes. This feature not only minimizes the environmental impact but also contributes to lower operating costs.

Overall, the Mitsubishi Electronics XD490U is a robust projector that combines impressive image quality, versatile connectivity, and user-friendly features, making it an excellent option for anyone seeking a reliable projection solution for various professional and educational applications.
Top Page Image Contents