Mitsubishi Electronics RGB-CV10 specifications Connection and Operation

RGB-CV10

ADAPTER MODULE

Page 1 2 3

Connection and Operation

TV Back Panel

VIDEO		AUDIO
S-VIDEO	V	L (MONO) R

Y Cr Cb

DVD VIDEO

LOOP

ANT-A OUT ANT-B

INPUT-1

INPUT-2

INPUT-3

	HIGH-DEFINITION INTERFACE
		HDTV VIDEO
R	G	B	H	V
	HDTV CONTROL		HDTV AUDIO		2
			L(MONO)	R

						MONITOR
						OUTPUT
IR	IR/	ACTIVE A/V	V	L (MONO)	R
HOME	G LINK	NETWORK				PIP
THEATHER
						AUDIO
				L (MONO)	R	OUTPUT
			VIDEO	AUDIO

1

HDTV VIDEO OUT

R G B H V

HDTV CONTROL

RGB-CV10

Adapter Module Back Panel

HDTV VIDEO IN

Y Pb Pr

DC13.2V

3
4
5	6
	To AC wall
HDTV Receiver Back Panel	outlet

AUDIO AUDIO

Y L L VCR

CONTROL

OUT TO TV

Pb	R	R	CH 3
			CH 4
			DIGITAL
RF			AUDIO OUT

CAUTION

RISK OF ELECTRICAL SHOCK

DO NOT OPEN

Pr

PHONE JACK REMOTE VIDEO VIDEO S-VIDEO IN FROM ANT SATELLITE IN

1Connect one end of the HDTV control cable to the HDTV CONTROL terminal of the TV. Connect the other end to the HDTV CONTROL terminal of the Adapter Module.

2Following the color codes, connect the 5-in-1 BNC cable to the HDTV VIDEO terminals of the TV. Connect the other ends to the HDTV VIDEO OUT terminals of the Adapter Module. The terminal ends are color-coded as follows:

R-red cable	G-green cable	B-blue cable
H-white cable	V-yellow cable

3Connect one end of the Component Video cable or one end of the three video cables to the Y terminal of the Set Top Box. Connect the other end to the HDTV VIDEO IN Y terminal of the Adapter Module.

4Connect one end of the Component Video cable or one end of the three video cables to the Pb terminal of the Set Top Box. Connect the other end to the HDTV VIDEO IN Pb terminal of the Adapter Module.

5Connect one end of the Component Video cable or one end of the three video cables to the Pr terminal of the Set Top Box. Connect the other end to the HDTV VIDEO IN Pr terminal of the Adapter Module.

6Connect the DC 13.2V adapter cable of the AC adapter to the DC13.2V jack of the Adapter Module and connect its AC plug into the AC wall outlet.

Important: When a 1080i signal is input, the SIGNAL indicator on the front panel of the Adapter Module illuminates and signal isoutput to the TV. When a signal other than 1080i is input, the SIGNAL indicator on the front panel of the Adapter Module flashes and no signal is output to the TV. When there is no signal, the connection is incomplete or the TV POWER is OFF, the SIGNAL indicator on the front panel of the Adapter Module does not illuminate.