Series HMI Connection Manual
Output | Yb | Y0 – Y1FFF | Hexadecimal | |
Internal Relay | Mb | M0 – M8191 |
| |
Special Internal Relay | Mb | M9000 – M9255 |
| |
|
|
|
| |
Type | Format | Read/Write Range | Note | |
Bit No. (b) | ||||
|
|
| ||
Link Relay | Bb | B0 – B1FFF | Hexadecimal | |
Annunciator | Fb | F0 – F2047 |
| |
Timer Contact | TSb | TS0 – TS2047 |
| |
Timer Coil | TCb | TC0 – TC2047 |
| |
Counter Contact | CSb | CS0 – CS2047 |
| |
Counter Coil | CCb | CC0 – CC2047 |
|
NOTE
1)Before using this communication protocol, the user needs to set communication module via GX Developer programming tools. For more detailed information regarding the setting method, please refers to Mitsubishi PLC User Manual.
2)The device address must be the multiple of 16.
3)The device address must be the multiple of 16 plus 9000.
V1.01 Revision November, 2011 | 135 |