Mitsubishi Electronics S250, X250 user manual Menu operation, Picture, Audio, Installation, Option

Menu operation (continued)

1PICTURE

Opt

CONTRAST ........ Adjusts the picture contrast. The contrast becomes higher
	PICTURE
as the number increases.
		CONTRAST	0
BRIGHTNESS .... Adjusts image brightness. The image becomes brighter as
		BRIGHTNESS	0
the number increases.
		COLOR MATRIX	USER
COLOR MATRIX. ...... Adjusts color balance in each color of the image. See page 18.
COLOR TEMP.. .. Adjusts color temperature. See page 18.		COLOR TEMP.	1 / 2 / 3 / 4
SHARPNESS ...... Adjusts the picture sharpness. The sharpness becomes		SHARPNESS	0
sharper as the number increases. (It can not be changed		TINT	0
on XGA resolution.)		COLOR	0

TINT .................... Adjusts the color balance in the image. The color balance

of the image shifts green as the number increases and shifts to purple as the number decreases (displays only when the source is selected to VIDEO).

COLOR ................ Adjusts the color intensity of the image (displays only when the source is selected to VIDEO).

2 AUDIO

Opt

BASS ................... Adjusts the level of low frequencies.

AUDIO

TREBLE .............. Adjusts the level of high frequencies.

PinP AUDIO ....... Use to select the audio output in the PinP mode,

(Main)

BASS

1

or

(Sub).

TREBLE

1

3 INSTALLATION

PinP AUDIO

/

Opt

IMAGE REVERSE Use to reverse or invert the projected image.

R

(Mirror)

is used for rear projection.

R

(Mirror invert) is effective

INSTALLATION

IMAGE REVERSE

when the projector is ceiling-mounted.

R

KEYSTONE ........ Adjusts keystone correction of the image. If the image has

KEYSTONE

0˚

keystone distortion, select the approximate setting. For

AUTO POWER ON

ON

normal use, select 0˚.

AUTO POWER OFF

0

min

AUTO POWER ON ..... To select whether to boot up automatically when the power is

TEST

TEST SIGNAL

ON

OFF

turned on external to the projector. In this case, the main

power switch of the projector has to be ON. Set this when the projector is hanging on the ceiling.

•The projector is in stand-by mode when the lamp is not on. In this case, use the remote control to turn on the lamp.

AUTO POWER OFF ..Use to select the length of time before projector switches to stand-by when there is no input signal selected source. Select 0 min. to cancel this function.

TEST SIGNAL .... Use to display the built-in test patterns on the screen.

•The display will disappear when the setting is OFF or when you press any button except MENU, { ,}, STILL, LASER, mouse pointer or R/L-click.

4 OPTION				Opt
MENU POSITION . Use to select the position where the menu is displayed,
	OPTION
(upper left) or (lower right).
MODE DISPLAY ... Use to display the mode display on the screen.			MENU POSITION
SPLASH SCREEN . Use to display the splash screen on the screen when the		ON	MODE DISPLAY		ON
power is turned ON.		ON	SPLASH SCREEN		ON
CINEMA MODE .... When AUTO is set, the video signal is processed			CINEMA MODE		AUTO
appropriately for cinema source during inputting the	?		VIDEO SIGNAL		AUTO
cinema source with NTSC format. If the video signal is
		A Ë	LANGUAGE		English
processed during inputting the other source, set to OFF.

•When setting CINEMA MODE to AUTO, some images may not switch to cinema mode during inputting the cinema source.

•When setting CINEMA MODE to AUTO, images may not switch to video mode immedi- ately after switching the cinema source to video source. At that time, the image quality of the video source may get worse. If you wish to switch the mode immediately, press ENTER button.

VIDEO SIGNAL . When AUTO is set, the appropriate video format is automatically selected according to the input signal. If the image does not appear correctly, select the desired video format manually. Adjust the unit to the appropriate format when the unit either is not projecting

normally in auto mode or is projecting PAL-M/PAL-N signals.
LANGUAGE ....... Use to select the language for the projector display such as menu. (		/ English / Español
/ Deutsch / Français / Italiano /	)

EN – 16