Preparing your projector (continued)
Bottom side
1 | 1 |
|
1 Adjustment feet
Remote control
| 24 | |
1 | 23 | |
2 | ||
22 | ||
3 | ||
21 | ||
4 | ||
20 | ||
5 |
| |
6 |
| |
| 19 | |
7 | 18 | |
17 | ||
8 | 16 | |
9 | 15 | |
10 | 14 | |
11 | 13 | |
| 12 |
1ON ( I ) button
2 DVI button
3 HDMI button
4 COMPONENT button
5 AV MEMORY buttons
6 ENTER button
7 MENU button
8 CONTRAST button*
9 BRIGHTNESS button*
10 GAMMA button*
11 ZOOM/FOCUS button
12 LENS SHIFT button
13 NOISE REDUCTION button*
14 COLOR button*
15 SHARPNESS button*
16 COLOR TEMP button*
17 ASPECT button
18 AUTO IRIS button
19 Direction buttons
20 VIDEO button
21
22 COMPUTER button
23 AUTO POSITION button
24 OFF () button
* : See below for the picture quality adjusting buttons.
Important:
•When you press any button on the remote control, the buttons on the remote control are lit. Wait approx. 6 seconds after releasing the button to turn them off.
•The direction buttons are used for lens shift adjustment. The W and X buttons are also used for zoom/focus adjustment and fine adjustment.
Using the picture quality adjusting buttons
When you press any of the picture quality adjusting buttons, the screen for adjusting the picture quality appears. Adjust the picture quality by pressing the W and X buttons. The picture quality adjustment can be made alternatively in the IMAGE menu. (See page 25.) Items in the menus are shown in parentheses below.
CONTRAST (CONTRAST) | Adjusts the contrast of the projected image. |
BRIGHTNESS (BRIGHTNESS) | Adjusts the brightness of the projected image. |
COLOR TEMP (COLOR TEMP.) | Selects one of the preset color temperatures. Adjustment of USER mode is also |
| available. (Refer to page 31.) |
GAMMA (GAMMA MODE) | Selects one of the preset gamma mode. Adjustment of USER mode is also |
| available. (Refer to page 32.) |
SHARPNESS (SHARPNESS) | Adjusts the sharpness of the projected image. |
COLOR (COLOR) | Adjusts the color thickness of the projected image. |
NOISE REDUCTION | Adjusts the TRNR, MNR and BAR of the projected image. (See page 32.) |