Installation and Connection | Mitsubishi Electronics Pro 920

3INSTALLATION AND CONNECTION

On the back of the monitor two kinds of plug-in connections are provided: AC power connector for the AC input, DB9- 15P connector for video signal input.

3.1AC Power Connection

One end of the AC power cord is connected to the AC power connector on the back of the monitor. The other end is plugged into a properly grounded three-prong AC outlet. The monitor’s auto-sensing power supply can automati- cally detect 100-120V AC or 220-240V AC and 50 or 60Hz.

3.2Signal Cable Connection

The DB9-15P(VGA) connector is provided for compatible analog RGB outputs from your computer. Apple Macintosh computers can also be interfaced with using the optional Mitsubishi Macintosh adapter AD-A205.

3.2.1Connecting to Any IBM VGA Compatible Sys- tem

Figure 5 shows the SC-B104 cable connection to the Video Graphics Array (VGA) port in an IBM Personal System/2® series, or any VGA compatible system.

1.Power off, both the monitor and the computer.

2.Connect the one end of the SC-B104 cable to the DB9-15P connector on the VGA controller card.

3.Connect the other end of the SC-B104 cable to the DB9-15P receptacle on the back of the monitor.

4.Power on the monitor, then the computer.

5.After using the system, power off the monitor, then the computer.

		Computer
		VGA
		Compatible
	D-SUB	System
		System
		DB9-15P
Power Cord		Cable SC-B104

Figure 5

CAUTION

The socket-outlet shall be installed near the equipment and shall be easily accessible. During servicing, discon- nect the plug from the socket-outlet.

Méme si le moniteur est mis hors tension il reste toujours alimenté. La prise secteur devrait ainsi ètre facilement accssible en cas d'urgence.

3.2.2 Connecting to An Apple Macintosh Computer

Figure 6 shows the SC-B104 cable and AD-A205 Adapter(option) to the video port in an Apple Macintosh.

The Macintosh Adapter is available that converts the 2 row D-sub video connector on legacy Macintosh computers to

a3 row D-sub(VGA) connector compatible with your Mitsubishi monitor. The Macintosh Adapter is not needed on G3 (ice and blue) and later version of the Macintosh. If the Macintosh Adapter is required for your system, please contact our Information Support line at (800)843-2515 and Mitsubishi will provide this to you free of charge.

1.Power off, both the monitor and the computer.

2.Set the DIP switches of Macintosh Adapter according to the setting chart.

(See Section 7.3 Optional Macintosh Adapter AD- A205 settings.)

3.Connect the 15-pin (DB-15P) end of the AD-A205 Adapter to the straight 15-pin connector on the Macintosh video port on the computer or on the video board.

4.Connect the sub-miniature 15-pin (DB9-15P) end of the AD-A205 Adapter to the SC-B104 cable.

5.Connect the other end of the SC-B104 cable to the DB9-15P receptacle on the back of the monitor.

6.Power on the monitor, then the Macintosh.

7.After using the system, power off the monitor, then the Macintosh.

Computer

Apple Macintosh

Computer

D-SUB

Macintosh Adapter AD-A205

(Option)

Power Cord	Cable SC-B104
	Figure 6

•For the Apple Macintosh Computers having a VGA compatible port, steps 2 through 4 are not necessary. Connect the end of the signal cable to the port directly.

•In case of Apple Macintosh G3 series, use "Control Panel" of "Apple Menu" when selecting a resolution. If select the resolution from "Control Bar", no screen may be displayed and the computer may freeze.

- 10 -

Pro 920 specifications

The Mitsubishi Electronics Pro 920 is a state-of-the-art projector that combines advanced technology with high-quality performance, making it an excellent choice for professional presentations and dynamic environments. Designed for versatility, the Pro 920 caters to a range of applications, including corporate settings, educational institutions, and large venues.

One of the standout features of the Pro 920 is its impressive brightness output, which reaches up to 5,000 ANSI lumens. This high brightness enables crystal-clear images to be displayed even in well-lit rooms, ensuring that presentations can be seen without issue. Coupled with a high contrast ratio, the projector delivers deeper blacks and vibrant colors, enhancing the overall image quality.

The Pro 920 employs advanced DLP (Digital Light Processing) technology, known for its reliability and exceptional image rendering capabilities. This technology utilizes a digital micromirror device (DMD) chip, which contributes to sharpness and detail in each projected image. As a result, it’s ideal for displaying intricate graphics, detailed texts, and high-resolution videos.

Another notable characteristic is its compact design, which makes the Pro 920 easy to transport and set up. It features multiple connectivity options, including HDMI, VGA, and USB, allowing seamless integration with various devices such as laptops, tablets, and smartphones. The inclusion of wireless connectivity options further enhances its usability in dynamic presentation environments.

Mitsubishi has also focused on ensuring user-friendliness in the Pro 920’s design. The intuitive interface and remote control functionality make navigating through settings and inputs hassle-free. Furthermore, the projector offers robust zoom and lens shift capabilities, providing flexibility in installation and arrangement without compromising image quality.

The Pro 920 is built with durability in mind, incorporating long-lasting components and a low maintenance design. With a lamp life of up to 10,000 hours, users can expect extended periods of performance before needing replacements.

In conclusion, the Mitsubishi Electronics Pro 920 stands out as a powerful and flexible projector tailored for professional use. With its high brightness, advanced DLP technology, comprehensive connectivity options, and user-friendly features, it represents an ideal solution for enhancing the quality of visual presentations in any setting.