Mitsubishi Electronics MDT402S user manual Connecting a DVD Player with component out, English-16

Connecting a DVD Player with component out

Connecting your DVD player to your LCD monitor will enable you to display DVD video.

Refer your DVD player user’s manual for more information.

Connect the LCD Monitor to a DVD Player

•To connect the DVD/HD IN connector (BNC) on the LCD monitor, use a separately available BNC connector cable. You will need a BNC-to-RCA adapter to connect a DVD player with an RCA pin jack to the BNC connector cable (not provided). Some DVD player may have different connectors such as DVD/HD connector (Y, Cb/Pb and Cr/Pr).

Select [DVD/HD] input mode from the INPUT button.

The AUDIO IN 2 and 3 (both RCA) can be used for audio input. For connection, select [AUDIO 2] or [AUDIO 3] from the AUDIO INPUT button.

•Mode selection, see “DVI MODE” of page 25.

BNC-to-RCA adapter

To DVI output

leftoutput	rightoutput
BNCx3 Toaudio	Toaudio

To DVD Component video output

LCD monitor

RCA BNCx3

DVI-D connector

English-16

1-17