Mitsubishi Electronics LCD4000 user manual Setup Procedure

Page 11

Setup Procedure

English

1. Determine the installation location

CAUTION: DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY YOURSELF

Installing your LCD display must be done by a qualified technician. Contact your dealer for more information.

CAUTION: MOVING OR INSTALLING THE LCD MONITOR MUST BE DONE BY TWO OR MORE PEOPLE.

Failure to follow this caution may result in injury if the LCD monitor falls.

IMPORTANT: Lay the protective sheet, which was wrapped around the LCD monitor when it was packaged, beneath the LCD monitor so as not to scratch the panel.

2. Install the remote control batteries

The remote control is powered by 1.5V AA batteries. To install or replace batteries:

1.Press and slide to open the cover.

2.Align the batteries according to the (+) and (–) indications inside the case.

3.Replace the cover.

➀ Remove the cover ➁ Insert the batteries ➂ Replace the cover

CAUTION: Incorrect use of batteries can result in leaks or bursting.

Be careful especially about the following points.

•Place “AA” size batteries matching the + and - signs on each battery to the + and - signs of the battery compartment.

•Don’t mix battery types.

•Don’t combine new batteries with used ones.

It causes shorter battery life or leakage of batteries.

•Remove dead batteries immediately to prevent battery liquid from leaking into the battery compartment.

Don’t touch leaked liquid, it causes damages to your skin.

NOTE: If you do not intend to use the Remote Control for a long period, remove the batteries.

3. Connect external equipment (See pages 12~18)

•To protect the connected equipment, turn off the main power before making connections.

•Refer to your equipment user manual.

4. Connect the supplied power cord

•The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible.

•Fully insert the prongs into the power outlet socket. Loose connection may cause noise.

5.Switch on the power of all attached external equipment

When connected with a computer, switch on the power of the computer first.

6. Adjust the sound

Make adjustments when adjustment of the volume is required.

7. Adjust the screen (See pages 21~29)

Make adjustments when adjustment of the screen display position or distortion is required.

8. Adjust the image (See pages 21~29)

Make adjustments when picture adjustment such as the brightness or contrast is required.

9. In case of portrait position

•Remove the stand.

•Left side of monitor must become upper side (seen from front).

English-9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents LCD4000 Index English-1 Canadian Department of Communications Compliance StatementFCC Information English-2 Important InformationDeclaration Declaration of the ManufacturerEnglish-3 Safety Precautions, Maintenance & Recommended UseRecommended Use Contents Control Panel Parts Name and FunctionsTerminal Panel Wireless Remote Control English-8 Operating Range for the Remote ControlHandling the remote control Setup Procedure To avoid falling down How to Mount and Attach Options to the LCD MonitorUpright position Lay the screen face down Ventilation Requirements for enclosure mountingEnglish-11 How to install standHow to remove the stand English-12 Wiring DiagramConnections Before making connectionsEnglish-13 Connecting a Personal ComputerConnect the LCD Monitor to a Personal Computer English-14 Connecting to a Macintosh ComputerConnect the LCD Monitor to Macintosh English-15 Connections with Digital Interface EquipmentConnect the LCD Monitor to a Computer with a Digital Output English-16 Connecting a VCRConnect the LCD Monitor to a VCR or Laser Disc Player English-17 Connecting a DVD Player with component outConnect the LCD Monitor to a DVD Player English-18 Connecting a Stereo AmplifierConnect the LCD Monitor to a Stereo Amplifier Basic Operation Power on and OFF ModesPressing the power button Using the remote control Pressing the Main Power SwitchSelecting a video source Power IndicatorUsing Power Management Picture ModeOSM On-Screen-Manager Controls Computer Input Resolution TemperaturePicture Reset Clock PhaseAuto Setup Audio ResetPIP Reset ConfigurationLanguage Power SaveOFF Timer Factory PresetEnglish-25 OSM On-Screen-Manager Controls DVD&HD InputEnglish-26 ResetEnglish-27 TintNoise Reduction English-28 English-29 Color SystemEnglish-30 ConnectionEnglish-31 English-32 FeaturesSet your PC as follows Set Monitor LCD4000 as followsTroubleshooting English-34 Specifications for LCD4000Product Specifications Mini D-SUB 9P English-35 Pin AssignmentMini D-SUB 15P

LCD4000 specifications

Mitsubishi Electronics is renowned for its innovative technology solutions, and the LCD4000 is a standout product in their lineup. This advanced LCD display system is designed to offer a premium viewing experience, catering to both commercial and professional environments.

One of the key features of the LCD4000 is its impressive display quality. With a resolution of 1920x1080 pixels, this display provides crystal-clear visuals that are perfect for presentations, video playback, and interactive applications. The brightness level reaches an impressive 700 cd/m², ensuring that images remain vivid and sharp even in well-lit environments.

Mitsubishi has integrated cutting-edge LCD technology into the LCD4000, which includes a high dynamic contrast ratio. This feature allows for deeper blacks and brighter whites, enhancing the overall image quality. The color reproduction is also noteworthy, with the ability to display 16.7 million colors, providing lifelike representations that are critical for industries such as advertising and design.

The LCD4000 is designed for versatility. With the capability to be mounted in various orientations, whether horizontal or vertical, it can adapt to different display needs, making it suitable for digital signage, retail displays, or control room setups. Additionally, it supports daisy chaining, allowing multiple units to be connected seamlessly to create large video walls, ideal for broadcasting and events.

Durability and reliability are also hallmark characteristics of the LCD4000. Built with robust materials, the display is engineered for continuous operation, which is essential for commercial applications that require non-stop performance. Mitsubishi has incorporated advanced thermal management technology, ensuring that the display operates efficiently without overheating, thus prolonging its lifespan.

To enhance user convenience, the LCD4000 features an intuitive interface and multiple connectivity options, including HDMI, DisplayPort, and VGA. This flexibility allows users to connect various devices, from computers to media players, facilitating easy setup and operation.

In summary, the Mitsubishi Electronics LCD4000 combines high-quality display technology with versatility and reliability. Its exceptional resolution, brightness, color accuracy, and durability make it an ideal choice for a wide range of professional applications. Whether used in control rooms, retail spaces, or as part of a video wall, the LCD4000 promises to deliver a stunning visual experience that meets the demands of various industries.
Top Page Image Contents