4 Hardware Installation
Your monitor is equipped with an automatic power supply with a voltage range from 90 to 264 Volts AC at a frequency of 50 to 60 Hz. Make sure that your local power supply is within the supported range. If you are unsure, please contact your electricity supplier.
To install your Diamond View DV156 monitor:
1.Make sure that the power to the computer and the power to the monitor are both turned off.
2.Connect the blue connector of the monitor’s VGA cable to the VGA output of the computer‘s graphics card.
3.Connect the monitor‘s power cord to an AC power socket. Please make sure, that you have easy access to the power socket so you can disconnect the unit from the power socket should you need to.
Power Cable
VGA Signal Cable
6