Mitsubishi Electronics LDT46IV user manual Setup Procedure

Page 11

Setup Procedure

1. Determine the installation location

CAUTION:

DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY YOURSELF.

Installing your LCD display must be done by a quali ed technician. Contact your dealer for more information.

CAUTION:

MOVING OR INSTALLING THE LCD MONITOR MUST BE DONE BY TWO OR MORE PEOPLE.

Failure to follow this caution may result in injury if the LCD monitor falls.

CAUTION:

Do not mount or operate the display upside down, face up, or face down.

CAUTION:

Do not install the LCD monitor where it will be exposed to direct sunlight, as this will result in display defects.

CAUTION:

This LCD has a temperature sensor and cooling fan. If the LCD becomes too hot, the cooling fan will turn on automati- cally. If the LCD becomes overheated and the cooling fan is running, the “Caution” menu will appear. If the “Caution” menu appears, discontinue use and allow the unit to cool. When the LCD monitor is used in an enclosure or with protec- tion on LCD surface, please check the inside temperature of monitor by “HEAT STATUS” (See page 29). The temperature is too hot than normal condition, please set “cooling fan” to ON on SCREEN SAVER function (See page 26).

IMPORTANT:

Lay the protective sheet, which was wrapped around the LCD monitor when it was packaged, beneath the LCD monitor so as not to scratch the panel.

2. Install the remote control batteries

The remote control is powered by 1.5V AAA batteries. To install or replace batteries:

1.Press and slide to open the cover.

2.Align the batteries according to the (+) and (–) indications inside the case.

3.Replace the cover.

•Remove dead batteries immediately to prevent battery liquid from leaking into the battery compartment. Don't touch exposed battery acid, it cause damage to your skin.

NOTE:

If you do not intend to use the Remote Control for a long period, remove the batteries.

3. Connect external equipment (See page 14-18)

•To protect the connected equipment, turn off the main power before making connections.

•Refer to your equipment user manual.

4. Connect the supplied power cord

•The power outlet socket should be installated as near to the equipment as possible, and should be easily accessible.

•Fully insert the prongs into the power outlet socket. Loose connection may cause noise.

NOTE:

Please refer to “Safety Precautions, Maintenance & Recommended Use” section of this manual for proper selection of AC power cord.

Clamper

 

 

 

Cable Holder

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAUTION:

Incorrect use of batteries can result in leaks or bursting. Be careful especially about the following points.

•Place “AAA” batteries matching the + and - signs on each battery to the + and - signs of the battery compartment.

•Do not mix battery types.

•Do not combine new batteries with used ones. It causes shorter battery life or leakage of batteries.

5. Switch on the power of all the attached external equipment

When connected with a computer, switch on the power of the computer rst.

6. Operate the attached external equipment

Display the signal on the external equipment you wish.

English-10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents LCD Display Monitor Index FCC Information Important InformationResponsible Party Canadian Department of Communications Compliance StatementDeclaration of the Manufacturer DeclarationErgonomics Recommended UseContents Control Panel Parts Name and FunctionsTerminal Panel Audio in 1, 2 AC in connectorPicture Mode button Wireless Remote ControlHandling the remote control Operating Range for the Remote ControlSetup Procedure To prevent the main power switch from being changed Adjust the soundAdjust the screen See pages Adjust the image SeeLDT461V When LDT461V is installed in portrait positionHow to set-up LandscapeTo avoid monitor from falling MountingUpright position Lay the screen face downBefore making connections Wiring DiagramConnections Connect the LCD Monitor to a Personal Computer Connecting a Personal ComputerConnect the LCD Monitor to a Computer with a Digital Output Connecting with Digital Interface EquipmentConnect the LCD Monitor to a DVD Player Connecting a DVD Player with component outConnect the LCD Monitor to a Stereo Ampli er Connecting to a Stereo Ampli erUsing the remote control Power on and OFF ModesPressing the Main Power Switch Pressing the power buttonAudio Source Switching Power IndicatorUsing Power Management Picture ModeVIDEOS, Video Information OSDRGB1, 2, 3 DVD/HDOSD On-Screen-Display Controls Picture Position Zoom ModeScreen Reset ScreenPIP Picture in Picture AudioConfiguration OSD H Position OFF TimerOSD Turn OFF Information OSDIR Control Advanced OptionGamma Selection Heat Status Power on DelayAdvanced Option Reset TilingRecommendations For long life use of Public DisplayImage Sticking of LCD Panel Hint Remote control numbering functionConnection Power Power onAscii HEX Power on Power OFFZoom FeaturesTroubleshooting No Sound Remote Control is not availableSCHEDULE/OFF Timer function is not working properly No Signal is displayed on the screenSpeci cations LDT461V Speci CationsPin Assignment North America Mitsubishi Contact Information

LDT46IV specifications

The Mitsubishi Electronics LDT46IV is a high-performance large format LCD display designed for a range of commercial applications. This model stands out due to its impressive combination of advanced technologies, durability, and versatility, making it an ideal solution for environments such as retail, control rooms, and corporate settings.

One of the main features of the LDT46IV is its 46-inch screen size, which offers a perfect balance between visibility and space management. The display boasts a full HD resolution of 1920 x 1080 pixels, ensuring that images and videos are presented with remarkable clarity and detail. This high resolution is particularly beneficial for applications that require precise information delivery, such as informational displays in public spaces or advertising in retail stores.

The LDT46IV utilizes LED backlighting technology, which not only enhances the brightness and color vibrancy of the display but also contributes to lower power consumption. The LED technology results in a longer lifespan compared to traditional CRT displays, making the LDT46IV a cost-effective choice over time. Furthermore, its energy efficiency aligns with growing sustainability practices within the industry.

Another significant characteristic of the LDT46IV is its robust design, built to withstand the rigors of continuous operation. The display is equipped with a durable casing and is designed for 24/7 usage, making it suitable for mission-critical environments. Additionally, the screen features anti-glare coating, which improves visibility under various lighting conditions and minimizes reflections that can distract viewers.

The connectivity options on the LDT46IV are extensive, allowing for integration with different devices and systems. It includes multiple input ports such as HDMI, DVI, and VGA, ensuring compatibility with computers, multimedia players, and other presentation equipment. This connectivity flexibility simplifies the installation process and enhances the display's functionality.

Mitsubishi also incorporates advanced technologies in the LDT46IV to improve the overall user experience. Features such as an intelligent cooling system help manage temperature, thereby protecting the internal components and maintaining optimum display performance.

Overall, the Mitsubishi Electronics LDT46IV is a versatile and powerful solution for various applications, combining a large display size, high resolution, and advanced technologies. Its durability, energy efficiency, and extensive connectivity options make it an excellent choice for businesses looking to enhance their visual communications.
Top Page Image Contents